ZHC9454X - Range hood ZANUSSI - Free user manual and instructions
Find the device manual for free ZHC9454X ZANUSSI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wall-Mounted Chimney Range Hood |
| Brand | Zanussi |
| Model | ZHC9454X |
| Width | 90 cm |
| Depth | 50 cm |
| Telescopic Chimney Height | 70 - 120 cm |
| Net Weight | 18 kg |
| Power Supply | 220-240 V, 50 Hz |
| Motor Power | 250 W |
| Max Extraction Capacity | 750 m³/h |
| Number of Speeds | 4 |
| Noise Level (Max Speed) | 65 dB(A) |
| Control Type | Touch Control Panel |
| Lighting | 2 x 3 W LED |
| Grease Filter | Aluminium Mesh, Dishwasher Safe |
| Carbon Filter | Optional (Model ZHC005) |
| Duct Diameter | 150 mm |
| Operating Modes | Extraction / Recirculation |
| Safety Features | Overheat Protection, Thermal Cutoff |
| Maintenance | Clean filters monthly; wipe surfaces with damp cloth |
| Spare Parts Availability | Motor, control board, filters and LED modules available |
| Finish | Stainless Steel |
Frequently Asked Questions - ZHC9454X ZANUSSI
How do I clean the grease filters on my ZHC9454X?
Remove the aluminum mesh filters and wash them with warm soapy water or place them in the dishwasher at a low temperature. Check and clean the filters every 3 months for optimal performance.
How can I replace the LED lights?
The hood uses LED modules. Pry gently with a flat screwdriver to remove the lens, then replace the LED module with a compatible 3W LED. Always disconnect the power first.
Can the ZHC9454X be used without a duct?
Yes, the hood supports recirculation mode. You need to install an optional carbon filter (ZHC005) to neutralize odors. The charcoal filter cannot be washed and should be replaced every 4-6 months.
What is the maximum extraction capacity?
The hood offers a 750 m³/h extraction capacity at the highest speed, perfect for kitchens up to 20 m².
How often should I replace the carbon filter?
If you use recirculation mode, replace the carbon filter every 4 to 6 months depending on cooking frequency. The grease filters should be cleaned more often.
Why is the hood not turning on?
Check if it is plugged in and the circuit breaker has not tripped. Also ensure the thermal cutoff hasn't activated. If it persists, inspect the control board or call a technician.
What duct size is required for installation?
A 150 mm diameter duct is recommended for optimal airflow. Using a smaller duct will reduce performance and increase noise.
How can I reduce the noise level?
Use a lower speed for quiet operation, tighten all connections, and ensure the duct is not kinked. Regular cleaning of filters also reduces motor strain.
Can I install the hood myself?
It is recommended to have a qualified electrician perform the installation, especially for hardwired configurations. Ensure the wall can support the weight of 18 kg and follow the mounting template.
Are spare parts available for this model?
Yes, you can find genuine Zanussi spare parts such as motors, LED modules, filters and control boards online or from authorised service centers.
User questions about ZHC9454X ZANUSSI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual ZHC9454X - ZANUSSI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ZHC9454X by ZANUSSI.
USER MANUAL ZHC9454X ZANUSSI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ZANUSSI
Model : ZHC9454X
Category : Range hood