330191 - Range hood MIDEA - Free user manual and instructions
Find the device manual for free 330191 MIDEA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wall-mounted range hood |
| Brand | Midea |
| Model | 330191 |
| Dimensions (W x D x H) | 60 cm x 48 cm x 15 cm |
| Net Weight | 8 kg |
| Power Supply | 220–240 V, 50 Hz |
| Total Power Consumption | 200 W |
| Motor Power | 180 W |
| Number of Speeds | 3 speed settings |
| Max Extraction Capacity | 600 m³/h |
| Noise Level (Max) | 65 dB |
| Lighting | 2 x 1.5 W LED lights |
| Control Type | Electronic push buttons |
| Material | Stainless steel body with tempered glass |
| Grease Filter | Washable aluminum filter |
| Air Outlet Diameter | 150 mm |
| Operating Modes | Extraction and recirculation (charcoal filter sold separately) |
| Cleaning and Maintenance | Clean grease filter monthly; wipe surfaces with non-abrasive cleaner |
| Safety Features | Overheating protection and auto shut-off |
| Spare Parts Availability | Filters, LED modules, and controls available from Midea service centers |
| User Manual | Free PDF download from notice-facile.com |
| Certifications | CE marked |
Frequently Asked Questions - 330191 MIDEA
How do I install the Midea 330191 range hood?
The hood should be mounted on a solid wall at a minimum height of 65 cm above an electric cooktop or 75 cm above a gas cooktop. Use the included mounting bracket and fix securely. Connect the exhaust duct (150 mm) to the top outlet, ensuring it is sealed to prevent leaks. Follow the user manual for detailed step-by-step instructions with diagrams.
How do I clean the aluminum grease filter?
Remove the grease filter by pressing the metal clip and pulling it out. Wash it in warm soapy water or in the dishwasher at low temperature. Rinse thoroughly and dry completely before reinstalling. Clean the filter at least once a month to maintain performance.
Can I use this hood in recirculation mode?
Yes, the Midea 330191 supports recirculation mode. You need to install a charcoal filter (not included) over the motor outlet. Air is then filtered through charcoal and returned into the kitchen. Make sure the charcoal filter is replaced every 3–6 months for optimal odor elimination.
What are the recommended safety distances?
For safe operation, install the hood at least 65 cm above an electric hob and 75 cm above a gas hob. These distances prevent heat damage and ensure efficient smoke capture. If your cooktop manual specifies a larger distance, always follow that.
Why is my range hood making excessive noise?
Excessive noise can be caused by a dirty filter, loose parts, or a blocked exhaust duct. First, clean the grease filter and ensure it is properly locked in place. Verify that all screws on the hood are tightened. Also check for any obstructions in the ductwork. If noise persists, contact Midea service.
How do I replace the LED lights?
The LED lights are integrated modules. To replace, switch off the power supply. Gently pry out the old LED module using a flat-head screwdriver and disconnect the wiring connector. Connect the new LED module (2 x 1.5 W, available from Midea) and press it firmly into place. Ensure the housing is sealed against moisture.
What size duct adapter does this hood require?
This hood requires a 150 mm diameter exhaust duct. When connecting, use rigid or flexible ducting with the same diameter. Properly seal all connections with aluminum tape to avoid air leaks and maximize extraction performance.
How often should I perform maintenance?
Clean the grease filter monthly to prevent grease buildup. Check the exhaust duct for blockages every 3 months. Replace the charcoal filter every 3–6 months and wipe down the stainless steel surfaces weekly to keep the hood looking new.
Is the Midea 330191 suitable for island installation?
No, this model is specifically designed for wall mounting. It comes with a rear bracket and a top exhaust outlet, which is not suitable for island use. Consider an island or ceiling-mounted hood if your kitchen layout requires overhead installation.
The control buttons are not responding. What should I do?
Check if the power cord is properly connected and the socket supplies power. If the overheat protection has been triggered, wait for 15 minutes for it to reset. Disconnect power for a few seconds and reconnect. If buttons still do not operate, the control board may be faulty — contact Midea service for replacement.
User questions about 330191 MIDEA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual 330191 - MIDEA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 330191 by MIDEA.
USER MANUAL 330191 MIDEA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MIDEA
Model : 330191
Category : Range hood