TAT2200 - Headphones PHILIPS - Free user manual and instructions
Find the device manual for free TAT2200 PHILIPS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | True Wireless Earbuds |
| Brand | Philips |
| Model | TAT2200 |
| Color | Black |
| Bluetooth Version | 5.0 |
| Wireless Range | Up to 10 m |
| Battery Life (Earbuds) | 6 hours per charge |
| Battery Life (with Charging Case) | Up to 18 hours total |
| Charging Time | 2 hours for earbuds |
| Charging Connector | USB-C |
| Frequency Response | 20 - 20,000 Hz |
| Impedance | 16 Ohm |
| Driver Unit | 6 mm |
| Water Resistance | IPX4 (splash-proof) |
| Weight per Earbud | 4.5 g |
| Weight of Charging Case | 30 g |
| Noise Isolation | Passive noise isolation |
| Controls | Touch controls |
| Microphone | Yes, built-in |
| Voice Assistant Support | Yes (Siri / Google Assistant) |
| Maintenance and Cleaning | Wipe with a soft, dry cloth |
| Safety Warning | Do not expose to excessive heat or moisture |
| Spare Parts and Repairability | Replacement ear tips available; not user-serviceable |
| Package Contents | Earbuds, charging case, USB-C cable, ear tips, manual |
| Warranty | 1-year limited warranty |
Frequently Asked Questions - TAT2200 PHILIPS
How do I pair the Philips TAT2200 earbuds to my phone?
To pair, remove the earbuds from the charging case. They will enter pairing mode automatically. Enable Bluetooth on your device and select Philips TAT2200 from the available devices.
How can I reset the TAT2200 earbuds?
Place both earbuds in the charging case and keep the case open. Press and hold the multi-function buttons on both earbuds for 10 seconds until the LED flashes red and white. This will reset the earbuds to factory settings.
How do I charge the charging case?
Use the included USB-C cable and connect it to a power source. The LED on the case will indicate the charging status. A full charge takes about 2 hours.
What is the battery life of the TAT2200 earbuds?
The earbuds provide 6 hours of playtime on a single charge. With the charging case, you can get a total of 18 hours before needing to recharge the case.
Are the TAT2200 earbuds waterproof?
The earbuds have an IPX4 rating, meaning they are resistant to sweat and light splashes. They are not suitable for swimming or heavy rain.
Can I wear just one earbud at a time?
Yes, you can use either the left or right earbud independently for calls or music. The earbuds will automatically connect to each other when both are in use.
How do I control music playback on the TAT2200?
Tap the right earbud to play or pause. Double-tap the right earbud to skip to the next track. Triple-tap the right earbud to go back to the previous track.
How do I answer or end a call with the earbuds?
Tap either earbud once to answer or end a call. Tap twice to reject an incoming call.
How should I clean the TAT2200 earbuds?
Use a soft, dry cloth to wipe the exterior. For the ear tips and speaker mesh, gently remove any earwax with a dry cotton swab. Do not use liquids or abrasive cleaners.
What should I do if the earbuds are not charging?
Check the charging pins on the case and earbuds for dirt or debris. Clean them with a dry cotton swab. Ensure the earbuds are correctly seated in the case and the case has battery power.
User questions about TAT2200 PHILIPS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Headphones in PDF format for free! Find your manual TAT2200 - PHILIPS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TAT2200 by PHILIPS.
USER MANUAL TAT2200 PHILIPS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PHILIPS
Model : TAT2200
Category : Headphones