ePark Pro - Lawn mower STIGA - Free user manual and instructions
Find the device manual for free ePark Pro STIGA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Robotic lawn mower |
| Brand | STIGA |
| Model | ePark Pro |
| Power Source | Rechargeable lithium-ion battery |
| Charging Time | Approximately 60 minutes |
| Mowing Duration | Up to 90 minutes per charge |
| Cutting Width | 25 cm |
| Cutting Height Range | 20 - 60 mm, adjustable |
| Cutting System | 3 freely pivoting razor blades |
| Recommended Lawn Area | Up to 1500 m² |
| Maximum Slope | 35% |
| Dimensions (L × W × H) | 55 × 40 × 25 cm |
| Weight | 8 kg |
| Protection Rating | IPX5 water resistant |
| Noise Level | 58 dB (A) |
| Navigation | Random and systematic mowing patterns |
| Control System | LED display and push buttons |
| Scheduling | Programmable mowing times |
| Sensors | Rain sensor, lift sensor, tilt sensor |
| Anti-Theft | PIN code lock with alarm |
| Safety Features | Automatic blade stop, child lock |
| Maintenance | Regular cleaning and blade replacement |
| Spare Parts & Repair | Manufacturer spare parts available, modular design |
Frequently Asked Questions - ePark Pro STIGA
How do I start the ePark Pro for the first time?
Press the power button to turn on the display, set the current time and mowing schedule, then place the mower on the lawn and press the start (play) button. It will automatically move to the charging station after finishing.
How can I adjust the cutting height?
Use the control panel to select the cutting height from 20 to 60 mm. The mower adjusts the cutting deck automatically. For best results, set a lower height in spring and a higher height in summer.
Does the mower have a rain sensor?
Yes, the ePark Pro is equipped with a rain sensor that detects rainfall and returns the mower to the charging station to avoid cutting wet grass.
How do I set a mowing schedule?
Navigate to the schedule menu on the LED display using the buttons. You can set different mowing times for each day of the week. Confirm with the OK button.
What should I do if the mower gets stuck?
The mower will stop and display an error message. Move it to a flat area, remove any obstacles from the boundary wire, and press the start button to resume. Ensure the boundary wire is properly installed.
How often should I replace the blades?
Check the blades regularly, typically every 2-4 weeks depending on lawn size and grass conditions. Replace them when they are dull or damaged. The ePark Pro uses 3 razor blades that can be easily replaced with a screwdriver.
Is the ePark Pro waterproof?
The mower has an IPX5 protection rating, meaning it is resistant to water jets from any direction. It can stay outside in rain, but should not be washed with a high-pressure cleaner.
How do I clean the mower?
Turn off the mower and use a soft brush or cloth to remove grass clippings and dirt from the body, wheels and cutting deck. Clean the charging contacts with a dry cloth. Never use water directly into the electronic components.
Can I use the mower on slopes?
Yes, the ePark Pro can handle slopes up to 35% depending on weather and grass conditions. For steeper slopes, install the boundary wire in a way that prevents the mower from navigating too steep areas.
How do I store the mower for winter?
Fully charge the battery, clean the mower, and store it in a dry, frost-free room. Disconnect the charging station from power. To extend battery life, charge it to about 50% and recharge every 2 months.
User questions about ePark Pro STIGA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lawn mower in PDF format for free! Find your manual ePark Pro - STIGA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ePark Pro by STIGA.