TC51 - Barcode Reader ZEBRA - Free user manual and instructions
Find the device manual for free TC51 ZEBRA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rugged Mobile Computer with Barcode Reader |
| Dimensions | 155 mm x 75 mm x 14.4 mm (6.1 x 3.0 x 0.6 in) |
| Weight | 247 g (8.7 oz) including battery |
| Display | 4.7-inch HD (1280 x 720) capacitive touchscreen with Gorilla Glass |
| Operating System | Android 7.0 (upgradable to Android 8.1) |
| Processor | Qualcomm Snapdragon 650 quad-core |
| Memory | 2 GB RAM / 16 GB Flash (configurable to 3 GB / 32 GB) |
| Battery | Rechargeable Li-Ion 3000 mAh, user-replaceable |
| Barcode Scanner | Integrated 1D/2D imager (SE4710) |
| Wireless Connectivity | Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 4.1, NFC, GPS |
| Camera | 8 MP rear with flash, 2 MP front-facing |
| Environmental Protection | IP67 sealed against dust and water immersion |
| Drop Specification | Rated to withstand drops from 1.2 m (4 ft) |
| Key Functions | Data capture, voice communication, wireless enterprise mobility |
| Cleaning and Maintenance | Wipe with a soft, dry cloth; use mild soap if needed |
| Security | Secure boot, hardware encryption, remote device management |
| Spare Parts and Repair | User-replaceable battery and back cover; authorized service centers available |
| General Information | Designed for retail, warehouse, and field mobile applications |
Frequently Asked Questions - TC51 ZEBRA
How do I scan a barcode with the TC51?
Aim the top-mounted scanner window at the barcode and press the scan button on the side of the device. The TC51 reads both 1D and 2D barcodes instantly.
Can the TC51 battery be replaced by the user?
Yes, the Li-Ion 3000 mAh battery is user-replaceable. Turn off the device, remove the back cover, and lift out the battery.
Is the ZEBRA TC51 waterproof?
The TC51 has an IP67 rating, meaning it is fully protected against dust and can survive temporary immersion in water up to 1 meter for 30 minutes.
Can I upgrade the operating system?
Yes, the TC51 comes with Android 7.0 and can be upgraded to Android 8.1 through ZEBRA's software update process.
What types of barcodes does the TC51 read?
The integrated 1D/2D imager reads standard linear barcodes (UPC, EAN, Code 128) and 2D codes like QR codes, Data Matrix, and PDF417.
How do I clean the TC51 screen and scanner window?
Use a soft, lint-free cloth. For stubborn dirt, slightly dampen the cloth with a mild soap-and-water solution. Avoid harsh chemicals that can damage the glass or touchscreen.
What should I do if the scanner stops reading?
First, clean the scanner window. Then restart the device. If the problem persists, check the scanner settings or perform a factory reset. In most cases, the imager is reliable.
Does the TC51 support Bluetooth headphones or printers?
Yes, the TC51 supports Bluetooth 4.1, allowing you to connect wireless accessories such as headphones, barcode printers, and scanners.
What is the typical battery life under normal use?
With moderate scanning and wireless usage, the 3000 mAh battery typically lasts 8 to 12 hours per charge, depending on screen brightness and active radios.
How do I perform a factory reset on the TC51?
Go to Settings > Backup & Reset and select Factory Data Reset. Alternatively, use the hardware key combination (Power + Volume Down) to access recovery mode for a full reset.
User questions about TC51 ZEBRA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Barcode Reader in PDF format for free! Find your manual TC51 - ZEBRA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TC51 by ZEBRA.