AP Optima 147 - Camera AGFA - Free user manual and instructions
Find the device manual for free AP Optima 147 AGFA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 35mm film compact camera |
| Brand | AGFA |
| Model | AP Optima 147 |
| Film Format | 35mm (135) |
| Lens | 38-70mm zoom lens, f/3.9-6.5 |
| Focusing | Active autofocus system |
| Shutter | Electronic programmed shutter, 1/4 - 1/1000 sec |
| Exposure Control | Automatic program exposure |
| Film Speed Setting | DX code automatic, ISO 100/200/400 |
| Built-in Flash | Yes, pop-up type |
| Flash Range | Approx. 0.8 - 4.0 m at wide-angle |
| Self-Timer | 10-second delay with blinking LED |
| Film Transport | Automatic load, advance, and rewind |
| Viewfinder | Real-image zoom viewfinder with autofocus frame |
| Power Source | 2 x CR2 lithium batteries |
| Dimensions | 126 x 76 x 57 mm (closed) |
| Weight | 270 g (without batteries) |
| Tripod Socket | Yes, standard 1/4 inch thread |
| Red-Eye Reduction | Yes |
Frequently Asked Questions - AP Optima 147 AGFA
How do I load the film in my AGFA AP Optima 147?
Open the camera back by sliding the release button. Insert the 35mm film cartridge into the left compartment. Pull the film leader over to the red mark on the right. Close the back firmly; the camera will advance to frame 1 automatically. Always load the film in subdued light.
What type of battery does the AGFA AP Optima 147 require?
The camera requires two CR2 lithium 3V batteries which are commonly available. Insert them in the battery compartment following the polarity indicators. The battery status is shown via an LED on the viewfinder.
How do I set the ISO on this camera?
The camera automatically reads the DX code from the film cassette and sets ISO 100, 200, or 400. If you use a film without DX code, the ISO reverts to 100. There is no manual override on this model.
How can I take a self-portrait with the self-timer?
Mount the camera on a tripod and press the shutter release. The self-timer LED blinks for about 10 seconds and the exposure is taken. For best results, set the focus using the focus lock on your subject.
What should I do if the flash does not fire?
Verify that the flash mode is set to "auto" or "fill-in". Wait until the ready lamp or indicator lights up, indicating the flash is charged. If not, replace the batteries. Ensure the subject is within the flash range.
How do I rewind the film when I finish the roll?
When the final frame is exposed, the motor automatically rewinds the film. During rewinding, the rewind indicator may blink. Never open the camera back before rewinding is complete.
What is the zoom range of the lens?
The camera has a 38-70mm zoom lens with a maximum aperture of f/3.9 to f/6.5. To zoom, adjust the lens ring on the front.
How do I clean the lens properly?
First, blow off loose dust with a blower. Then wipe the lens with a soft microfiber cloth in a circular motion. Avoid harsh solvents or touching the glass surface directly.
Can I use the camera with a tripod?
Yes, the camera has a standard 1/4-inch tripod socket on the base. Always use a suitable tripod to avoid camera shake in low light.
Why are my pictures blurry?
Blur can result from camera shake or incorrect focus. Ensure you hold the camera steady, especially in low light. The autofocus needs adequate contrast; aim the center focus area at your subject. Use the flash or a tripod as needed.
User questions about AP Optima 147 AGFA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Camera in PDF format for free! Find your manual AP Optima 147 - AGFA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AP Optima 147 by AGFA.