GSM7328Sv2 - NAS NETGEAR - Free user manual and instructions
Find the device manual for free GSM7328Sv2 NETGEAR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Gigabit Switch for NAS Environments |
| Brand | NETGEAR |
| Model | GSM7328Sv2 |
| Ports | 24 Gigabit Ethernet ports + 4 SFP ports |
| Switching Capacity | 128 Gbps |
| Forwarding Rate | 95.2 Mpps |
| Management | Web browser, CLI, SNMP v1/v2/v3 |
| Stacking | Yes, up to 8 units |
| Form Factor | Rack-mountable 1U |
| Power Supply | Internal 100-240V AC |
| Power Consumption | 69.4 W max |
| Dimensions | 17.32 x 10.12 x 1.7 in (440 x 257 x 43 mm) |
| Weight | 10.6 lb (4.8 kg) |
| Cooling | Integrated fans |
| Operating Temperature | 32° to 122°F (0° to 50°C) |
| Safety Certifications | CE, FCC, UL |
| Warranty | NETGEAR ProSAFE Lifetime Warranty |
| Maintenance | Clean with dry cloth, avoid liquids |
| Spare Parts | RMA service, power supply replacement |
| Repairability | Field replaceable units available |
| NAS Compatibility | High-speed connectivity for network storage servers |
Frequently Asked Questions - GSM7328Sv2 NETGEAR
How to reset the GSM7328Sv2 to factory defaults?
Hold the reset button on the front panel for 10 seconds until the System LED blinks. This will restore the factory configuration. The default IP address is 192.168.0.239.
How to access the management interface?
Connect to any Ethernet port with a computer, set a static IP in the same subnet (192.168.0.x), then open a browser and go to https://192.168.0.239. Use admin as the default username and password.
Does the switch support stacking with other models?
Yes, the GSM7328Sv2 supports up to 8 units stacking using the dedicated stacking ports or SFP ports. You can manage the stack as a single entity via the web or CLI.
What is the maximum power consumption of this device?
The maximum power consumption is 69.4 Watts. It operates with a 100-240V AC power supply and has an internal power unit.
Can I use this switch for a NAS setup?
Absolutely. The switch provides high-speed Gigabit connectivity for NAS devices, enabling fast file transfers and reliable network storage. It supports VLAN and QoS to prioritize traffic.
How to update the firmware on the GSM7328Sv2?
Download the latest firmware from NETGEAR support. In the web interface, go to Maintenance > Download, choose the file, and upload. The switch will reboot automatically.
What are the default login credentials?
The default username is admin and the default password is also admin. For security, change them immediately after first login.
The switch is not recognizing the SFP module. What could be the problem?
Ensure the SFP module is compatible with NETGEAR and inserted firmly into the slot. Check that the module is listed in the compatibility table. Also verify the fiber cables and clean the connectors.
How can I protect my network from unauthorized access?
The switch supports 802.1X port authentication, Access Control Lists (ACL), and VLAN segmentation. Use these features to secure your network and create isolated segments for NAS traffic.
Where can I download the user manual for free?
The manual is available at notice-facile.com. You can download the PDF by clicking the download button on this page. A translated version can also be requested via email.
User questions about GSM7328Sv2 NETGEAR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your NAS in PDF format for free! Find your manual GSM7328Sv2 - NETGEAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GSM7328Sv2 by NETGEAR.
USER MANUAL GSM7328Sv2 NETGEAR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NETGEAR
Model : GSM7328Sv2
Category : NAS