SJ8S - Soundbar LG - Free user manual and instructions
Find the device manual for free SJ8S LG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 2.1-channel soundbar with wireless subwoofer |
| Brand | LG |
| Model | SJ8S |
| Channels | 2.1 |
| Total Output Power | 200 W |
| Wireless Subwoofer | Included, 80 W |
| Connectivity | Bluetooth 4.0, Optical, HDMI, USB |
| HDMI | 1 input, 1 output with ARC support |
| Bluetooth Range | Approximately 10 meters |
| Audio Formats | FLAC, WAV, OGG, MP3, AAC |
| High Resolution Audio | Supported up to 24-bit / 192 kHz |
| Sound Modes | Standard, Cinema, Game, Bass Boost |
| Soundbar Dimensions (W x H x D) | 950 x 57 x 80 mm |
| Subwoofer Dimensions (W x H x D) | 160 x 390 x 300 mm |
| Soundbar Weight | 2.5 kg |
| Subwoofer Weight | 5.5 kg |
| Power Consumption | 45 W |
| Standby Power | Less than 0.5 W |
| Cleaning Instructions | Wipe with a soft, dry cloth; avoid liquids |
| Safety Warnings | Do not expose to moisture or extreme temperatures |
| Spare Parts & Repairability | Contact LG service center for original spare parts |
Frequently Asked Questions - SJ8S LG
How do I connect the soundbar to my TV via HDMI ARC?
Use a high-speed HDMI cable to connect the HDMI OUT (ARC) port of the soundbar to the HDMI IN (ARC) port of your TV. Make sure both devices support ARC and disable the TV's built-in speakers in the audio settings.
How do I pair the wireless subwoofer?
Plug the subwoofer into a power outlet and press the Link button on the back of the subwoofer for 3 seconds. Then press the Pair button on the remote control. The LED indicator will change from red to green when pairing is successful.
How do I connect my smartphone via Bluetooth?
Press the Bluetooth button on the remote or soundbar to enter pairing mode. On your smartphone, enable Bluetooth and select the device named LG SJ8S. The audio will be transmitted wirelessly.
What audio formats are supported via USB?
The USB port supports playback of MP3, WAV, OGG, AAC, and FLAC files. The drive should be formatted in FAT32 or NTFS.
How do I clean the soundbar?
Turn off the soundbar and unplug it. Use a soft, dry cloth to wipe the exterior. Avoid using water, solvents, or abrasive cleaners that could damage the finish.
How do I reset the soundbar to factory settings?
Press and hold the Volume Down and Bluetooth buttons on the soundbar simultaneously for about 5 seconds. The display will show 'RESET' and the unit will restart.
Why is there no sound from the soundbar?
Check that the soundbar is set to the correct input source and that the TV's audio output is set to HDMI or Optical. Ensure the volume is not muted and that the Optical or HDMI cable is fully inserted.
How do I mount the soundbar on a wall?
Use the wall mounting brackets included in the box. Mark the screw positions on a sturdy wall, drill holes, and insert anchors. Secure the brackets to the wall and then clip the soundbar onto the brackets until it clicks.
Can I control the soundbar with the TV remote?
Yes, if your TV supports HDMI-CEC. Enable this feature in the TV settings, and the TV remote will control the soundbar's volume and mute functions automatically. Alternatively, use LG Sound Sync for compatible LG TVs.
What is the best placement for the soundbar?
Place the soundbar directly below or above the TV at ear level, with no obstruction in front of the speakers. The wireless subwoofer can be placed anywhere in the same room, but ideally in a corner to enhance bass response.
User questions about SJ8S LG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Soundbar in PDF format for free! Find your manual SJ8S - LG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SJ8S by LG.