G 5210 U Active Plus - Dishwasher MIELE - Free user manual and instructions
Find the device manual for free G 5210 U Active Plus MIELE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Built-in dishwasher |
| Model | G 5210 U Active Plus |
| Brand | Miele |
| Installation | Undercounter (built-under) |
| Width | 59.8 cm |
| Height | 80.5 - 87 cm |
| Depth | 57 cm |
| Weight | 45 kg |
| Capacity | 12 place settings |
| Energy Efficiency Class | A++ |
| Noise Level | 48 dB |
| Programs | 4 (Auto, ECO 50, Intensive 75, Express 60) |
| Water Consumption | 12 L per cycle |
| Drying System | AutoOpen door drying |
| Control Panel | Electronic with LED display |
| Interior Lighting | LED |
| Safety System | Waterproof system + child lock |
| Rack System | Rackmatic with 3 levels |
| Remaining Time Display | Yes |
| Spare Parts Availability | 10 years guarantee |
| Repairability | High (modular components) |
Frequently Asked Questions - G 5210 U Active Plus MIELE
How to load the dishwasher?
Place larger items on the bottom rack and smaller, delicate items on the top rack. Ensure no utensils block the spray arms. Use the folding racks for flexible loading.
How to choose the right program?
Use Auto for normally soiled dishes, ECO 50 for energy-saving cycles, Intensive 75 for heavily soiled pots and pans, and Express 60 for lightly soiled loads. Refer to the program guide on the control panel.
How to clean the filters?
Remove the bottom rack and twist the cylindrical filter counterclockwise to lift it out. Rinse under running water and scrub if necessary. Clean the fine filter and replace all parts securely.
What detergent should I use?
Use only phosphate-free dishwasher detergent with a maximum of 50 ml per cycle. Avoid using liquid detergent. Tablets are suitable but may not dissolve fully in shorter programs.
How to fix a blocked spray arm?
Turn off the dishwasher and remove the spray arms. Clean the nozzles with a needle or small brush, then rinse thoroughly. Ensure the arms rotate freely before reinstalling.
How to install the dishwasher?
Connect the water supply to a cold water tap using the provided pressure hose. The drain hose must be installed with a loop to prevent backflow. Level the appliance by adjusting the feet and secure it to the cabinet.
What does the Waterproof System do?
The Waterproof System uses an electromechanical valve and a safety float to prevent water damage. If a leak is detected, the system automatically interrupts the water supply and pumps out residual water.
How to remove limescale?
Use a citric acid-based descaler in an empty dishwasher. Place the descaler in the detergent dispenser and run a hot program. Repeat every 2-3 months depending on water hardness.
How to care for stainless steel interior?
Wipe the interior with a soft damp cloth after each cycle. For stains and fingerprints, use a dedicated stainless steel cleaner. Avoid abrasive sponges and chlorine-based products.
How to reduce energy consumption?
Use the ECO program whenever possible, which consumes less water and energy. Always wait for a full load before starting, and clean the filters regularly to maintain efficiency.
User questions about G 5210 U Active Plus MIELE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual G 5210 U Active Plus - MIELE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. G 5210 U Active Plus by MIELE.
USER MANUAL G 5210 U Active Plus MIELE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MIELE
Model : G 5210 U Active Plus
Category : Dishwasher