EXT-3G-HD-C - Audio/video converter Gefen - Free user manual and instructions
Find the device manual for free EXT-3G-HD-C Gefen in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Audio/Video Converter |
| Brand | Gefen |
| Model | EXT-3G-HD-C |
| Input Interface | 3G-SDI (BNC connector) |
| Output Interfaces | HDMI (Type A), 3G-SDI loop output |
| Supported SDI Formats | SD-SDI, HD-SDI, 3G-SDI (up to 1080p60) |
| Maximum Resolution | 1080p (1920x1080) at 60 Hz |
| Audio Pass-through | Embedded SDI audio to HDMI |
| Power Supply | 5V DC via USB (adapter included) |
| Dimensions (W x H x D) | 3.15 x 1.10 x 2.36 in (80 x 28 x 60 mm) |
| Weight | 0.45 lb (200 g) |
| Enclosure Material | Aluminum metal casing |
| LED Indicators | Power (red), Signal Present (green) |
| Standards Supported | SMPTE 259M, 292M, 424M |
| Operating Temperature | 32 to 104 °F (0 to 40 °C) |
| Cleaning Instructions | Wipe with a soft, dry cloth; never use liquids or solvents |
| Safety Warnings | Do not expose to moisture or place near heat sources |
| Spare Parts and Repair | No user-serviceable parts inside; refer to qualified personnel |
| Mounting Options | Freestanding or screw-mountable via side tabs |
| Shipping Contents | EXT-3G-HD-C converter, 5V USB power adapter, user manual |
Frequently Asked Questions - EXT-3G-HD-C Gefen
What is the Gefen EXT-3G-HD-C used for?
The EXT-3G-HD-C is a compact audio/video converter that transforms 3G-SDI, HD-SDI, or SD-SDI video signals with embedded audio into HDMI for connection to monitors, projectors, or TVs. It also features a loop output to feed another SDI device.
Does the converter support audio?
Yes, it extracts embedded audio from the SDI signal and passes it through the HDMI output. Up to 8 channels of PCM audio is supported depending on the source.
What video resolutions are supported?
It supports SD (480i/576i), HD (720p, 1080i), and Full HD 1080p at 60 frames per second, as well as various 3G-SDI data rates up to 2.97 Gbps.
Can I power the converter from my computer?
Yes, it accepts 5V DC power via a USB cable. You can plug it into a standard USB port or use the included adapter.
How do I connect the converter to my setup?
Connect your SDI source (e.g., camera) to the SDI input using a BNC cable. Connect an HDMI cable from the converter to your display. If needed, connect another SDI device to the loop output. Finally, power on the unit.
Why is there no picture on the HDMI display?
Check that a valid SDI signal is present (the green LED should be on). Verify the HDMI cable is firmly connected and the display is switched to the correct input. Ensure the source format is one of the supported SDI standards.
What is the loop output for?
The loop output is a second SDI output that mirrors the input signal. This lets you connect the same SDI source to another device, like a second monitor or recording unit, without using a splitter.
Can I use this converter with a 4K source?
No, the EXT-3G-HD-C is designed for 3G-SDI signals up to 1080p only. It does not support 4K/UHD formats.
How do I clean and maintain the device?
Use a dry, lint-free cloth to gently clean the enclosure. Do not use liquids, aerosol sprays, or harsh chemicals. Keep the unit away from dust and moisture when not in use.
Are any parts user replaceable?
No, the converter has a sealed metal enclosure. There are no user-serviceable parts. If the unit fails, contact qualified service personnel or your dealer for repair.
User questions about EXT-3G-HD-C Gefen
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Audio/video converter in PDF format for free! Find your manual EXT-3G-HD-C - Gefen and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EXT-3G-HD-C by Gefen.