LC-WXL200A - Projector EIKI - Free user manual and instructions
Find the device manual for free LC-WXL200A EIKI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Video Projector |
| Brand | EIKI |
| Model | LC-WXL200A |
| Projection Technology | 3LCD |
| Native Resolution | WXGA (1280 x 800) |
| Brightness | 4200 lumens |
| Contrast Ratio | 2000:1 |
| Aspect Ratio | 16:10 |
| Lamp Type | UHP |
| Lamp Life | 5000 hours (Standard) / 6000 hours (ECO) |
| Projection Size | 40 to 300 inches |
| Projection Distance | 1.2 to 12.0 meters |
| Keystone Correction | Vertical +/- 30 degrees |
| Inputs | HDMI, VGA, Composite, S-Video, Audio |
| Outputs | Audio Out, VGA Monitor Out |
| Built-in Speaker | 10W |
| Noise Level | 32 dB (ECO mode) |
| Dimensions (W x D x H) | 345 x 267 x 108 mm |
| Weight | 3.5 kg |
| Power Consumption | 310W |
| Power Supply | AC 100-240V, 50/60Hz |
| Cleaning | Clean air filter regularly |
| Safety Features | Auto power off, overheat protection |
| Reparability | User-replaceable lamp and air filter |
Frequently Asked Questions - LC-WXL200A EIKI
What is the native resolution of the EIKI LC-WXL200A?
The EIKI LC-WXL200A features a WXGA (1280 x 800) native resolution, ideal for widescreen presentations.
How do I replace the lamp?
Replace the lamp when the indicator lights up. Turn off and unplug the projector, open the lamp cover on the bottom, loosen the screws, and pull out the old lamp. Insert a new one and secure it. Use only genuine EIKI replacement lamps.
Can I connect a laptop to this projector?
Yes, the projector has an HDMI port and a VGA input. Use an appropriate cable to connect your laptop. Select the corresponding input source from the menu.
How do I clean the air filter?
Switch off and unplug the projector. Locate the air filter on the side, remove it and use a vacuum cleaner to remove dust. Do not use water. Reinstall the filter after cleaning.
What is the recommended projection distance for a 100-inch screen?
For a 100-inch screen, position the projector approximately 3.0 to 4.5 meters away from the screen. Check the manual for exact distances based on zoom.
Does the projector have an audio output?
Yes, it includes an audio out port and a built-in 10W speaker. You can also connect external speakers via the audio out.
How can I adjust the keystone distortion?
Use the keystone correction buttons on the control panel or remote to adjust vertical distortion. The projector supports automatic vertical keystone correction for easier setup.
What should I do if the projector does not turn on?
Check the power cord connection, ensure the lamp door is closed, and verify that the power switch is on. If the overheating indicator flashes, wait for the projector to cool down.
Can this projector display 3D content?
The LC-WXL200A supports 3D projection with compatible 3D glasses and a 3D source. Ensure you have the correct HDMI cable and enable 3D in the menu.
How do I reset the lamp timer?
After replacing the lamp, go to the Setup menu, select "Lamp Timer Reset" and confirm. This clears the previous lamp usage hours.
User questions about LC-WXL200A EIKI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Projector in PDF format for free! Find your manual LC-WXL200A - EIKI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LC-WXL200A by EIKI.
USER MANUAL LC-WXL200A EIKI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : EIKI
Model : LC-WXL200A
Category : Projector