DFS1009X - Dishwasher BRANDT - Free user manual and instructions
Find the device manual for free DFS1009X BRANDT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Freestanding Dishwasher |
| Brand | Brandt |
| Model | DFS1009X |
| Installation Type | Freestanding |
| Width | 45 cm |
| Height | 85 cm |
| Depth | 60 cm |
| Net Weight | 38 kg |
| Capacity | 9 place settings |
| Number of Programs | 5 (Eco, Auto, Intensive, Quick, Glass) |
| Energy Efficiency Class | A++ |
| Annual Energy Consumption | 232 kWh |
| Water Consumption per Cycle | 9 L |
| Noise Level | 49 dB(A) |
| Electrical Supply | 220-240 V ~ 50 Hz |
| Power Consumption | 1760 W |
| Control Type | Electronic buttons with LED display |
| Adjustable Upper Basket | Yes |
| Salt and Rinse Aid Indicators | Yes |
| Self-Cleaning Filter | Yes |
| AquaStop Safety System | Yes |
| Maintenance Reminder | Clean filters and spray arms monthly |
| Spare Parts Availability | Original spare parts available from Brandt for 10 years |
Frequently Asked Questions - DFS1009X BRANDT
How do I install my Brandt DFS1009X dishwasher?
Connect the water inlet hose to a cold water supply with a 3/4 inch threaded tap, position the drain hose into a standpipe or sink connection, ensure the appliance is level, then plug into an earthed socket. Run a rinse cycle before first use.
What type of detergent should I use?
Use a branded dishwasher detergent in tablet, powder or gel form. For best results, also fill the rinse aid dispenser and the salt reservoir with dishwasher salt.
Why is the dishwasher not draining?
Check for kinks in the drain hose, clean the drain filter and the pump area, and make sure the drain connection is not blocked. If the problem persists, reset the appliance by unplugging it for one minute.
Why are my dishes still wet after the cycle?
Make sure the rinse aid container is full, use a program with a high-temperature rinse, and leave the door slightly open for 10 minutes after the cycle ends. Do not overload the racks.
What should I do when the salt indicator is on?
Open the salt reservoir cap, pour in dishwasher salt with the funnel supplied, then close the cap tightly. Run a short rinse cycle immediately to wash away any excess salt.
Can plastic items be washed in this dishwasher?
Yes, place plastic items in the upper basket or on a plastic-safe rack, away from the heating element. Select a lower-temperature program such as Eco or Glass to avoid deformation.
Why does the cycle stop before the end?
The door may have been opened, the water supply could be interrupted, or a safety alarm may have triggered. Press the Reset button, check the tap, drain hose and filters, then restart the cycle.
How often should I clean the dishwasher filters?
Clean the filter assembly once a month or whenever food residue is visible. Remove the lower spray arm and filter, rinse them under running water with a soft brush, and refit them securely.
What should I do if the dishwasher leaks?
Inspect the door seal, hose fittings and the outer edge of the dispenser. Make sure the appliance is level and the filter is not clogged. Replace any damaged seals and tighten connections.
Where can I get spare parts for the DFS1009X?
Contact Brandt customer service or an authorized spare parts dealer and quote the model number DFS1009X. Original spare parts are typically available for 10 years after purchase.
User questions about DFS1009X BRANDT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual DFS1009X - BRANDT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DFS1009X by BRANDT.
USER MANUAL DFS1009X BRANDT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BRANDT
Model : DFS1009X
Category : Dishwasher