V-1040 - Speakers Valcom - Free user manual and instructions
Find the device manual for free V-1040 Valcom in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Ceiling Speaker |
| Brand | Valcom |
| Model | V-1040 |
| Drive Unit | 4-inch cone driver |
| Frequency Response | 100 Hz - 15 kHz |
| Sensitivity | 90 dB (1W/1m) |
| Power Handling | 5W RMS (10W peak) |
| Impedance | 8 ohms (nominal) |
| Transformer Taps | 70V: 0.5W, 1W, 2W, 5W |
| SPL at Rated Power | 98 dB |
| Mounting Type | Ceiling recessed / surface mount |
| Material | Steel grille, ABS plastic baffle |
| Colour | White (paintable) |
| Dimensions | 8.7 x 2.4 inches (220 x 60 mm) |
| Weight | 1.3 lbs (0.6 kg) |
| Connection | Screw terminals |
| Power Source | Amplifier or paging system |
| Usage | Indoor paging, background music |
| Cleaning | Wipe with dry or slightly damp cloth |
| Safety | Indoor use only, avoid moisture |
| Spare Parts | Grille and transformer available |
| Repairability | Replaceable driver and transformer |
Frequently Asked Questions - V-1040 Valcom
How do I install the V-1040 ceiling speaker?
Cut a hole of matching diameter, insert the speaker, and tighten the mounting tabs. Connect the wire to the screw terminals, ensuring correct polarity. Use a 70V transformer tap for paging systems.
What are the power tap settings?
The V-1040 includes a 70V transformer with selectable taps of 0.5W, 1W, 2W, and 5W. Choose the tap that provides the desired sound level without overdriving the speaker.
Can the V-1040 be used outdoors?
No, the V-1040 is designed for indoor use only. For outdoor applications, consider a weatherproof speaker model.
How do I clean the speaker?
Use a soft, dry or slightly damp cloth to wipe the grille and surface. Avoid using abrasive cleaners or solvents that may damage the finish.
What is the frequency response of the V-1040?
The speaker delivers a frequency response of 100 Hz to 15 kHz, making it suitable for voice paging and background music.
What amplifier power is recommended?
For best performance, use an amplifier supplying 5 to 10 watts into the speaker's selected tap. Ensure the total load on the amplifier does not exceed its rated power.
How do I connect the V-1040 to a 70V system?
Connect the amplifier's 70V output to the speaker's transformer, selecting the appropriate tap. Ensure the polarity matches (+ and -). For direct 8-ohm use, bypass the transformer and connect to the driver terminals.
Does the speaker have a grille?
Yes, it comes with a steel grille that is paintable to match your ceiling.
Can I use it for background music?
Yes, the V-1040's frequency response and power handling make it suitable for low-level background music.
What should I do if there is no sound?
First, check the amplifier output and settings. Then verify that the speaker wire connections are secure. Test the driver by connecting an 8-ohm source directly. If nothing works, the driver or transformer may need replacement.
User questions about V-1040 Valcom
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speakers in PDF format for free! Find your manual V-1040 - Valcom and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. V-1040 by Valcom.
USER MANUAL V-1040 Valcom
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Valcom
Model : V-1040
Category : Speakers