TL-WR340GD - Router TP-LINK - Free user manual and instructions
Find the device manual for free TL-WR340GD TP-LINK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Wireless router |
| Brand | TP-LINK |
| Model | TL-WR340GD |
| Wireless standard | IEEE 802.11g/b |
| Wireless speed | Up to 54 Mbps |
| Frequency band | 2.4 GHz |
| Antenna | 1 external 5 dBi antenna |
| Ethernet ports | 1 WAN + 4 LAN, 10/100 Mbps |
| Security features | WPA/WPA2, WEP 64/128-bit, SPI firewall |
| Network protocols | PPPoE, Dynamic IP, Static IP, PPTP, L2TP |
| Management | Web-based configuration, remote management, access control |
| Dimensions | 174 x 111 x 27 mm |
| Weight | Approx. 220 g |
| Power supply | External adapter, 9V DC, 0.6A |
| Maintenance and cleaning | Disconnect power and wipe with a dry soft cloth; avoid liquids |
| Repairability and spare parts | No user-serviceable parts; contact qualified service |
| General information | Desktop design, suitable for home and small office |
Frequently Asked Questions - TL-WR340GD TP-LINK
How do I connect the TL-WR340GD router to the internet?
Connect your modem's Ethernet cable to the WAN port of the router. Power it on, open a browser, go to 192.168.1.1, run Quick Setup, and choose PPPoE or Dynamic IP according to your ISP.
What are the default login credentials?
The default IP address is 192.168.1.1. The default username and password are both admin in lowercase. Change them after the first connection.
How can I secure my wireless network?
Log in and go to Wireless > Wireless Security. Select WPA/WPA2-PSK with AES encryption and set a strong passphrase. This prevents unauthorized access.
Why is my Wi-Fi signal weak or unstable?
Place the router in a central, elevated position, away from thick walls and microwave ovens. Use a free wireless channel (1, 6 or 11) and update the router's firmware.
Can I use the TL-WR340GD as a range extender or access point?
The TL-WR340GD does not have a dedicated repeater mode. You can configure it as an access point by connecting it via LAN and disabling DHCP, but it will not repeat Wi-Fi wirelessly.
How do I reset the router to factory defaults?
With the unit powered on, press and hold the Reset button on the rear panel for about 10 seconds until the Power LED flashes. Release it; the router will restart with factory settings.
How can I restrict internet access for certain devices?
In the web administration page, go to Access Control and create rules based on MAC address or IP address. You can allow or deny internet access according to your schedule.
What should I do if the power LED is off?
Check the power adapter, cable, and wall outlet. Try another outlet. If the LED still does not light, the adapter or router may be defective and should be checked by a service technician.
How do I upgrade the router firmware?
Download the latest firmware from the TP-Link website. In the router's menu go to System Tools > Firmware Upgrade, select the downloaded .bin file, and click Upgrade. Keep the router powered during the whole process.
What is the maximum wireless data rate and usable range?
The maximum wireless rate is 54 Mbps on 802.11g. The real throughput is usually around 20 Mbps. Indoor range is typically up to 100 m and outdoor up to 300 m, depending on obstacles.
User questions about TL-WR340GD TP-LINK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual TL-WR340GD - TP-LINK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TL-WR340GD by TP-LINK.
USER MANUAL TL-WR340GD TP-LINK
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TP-LINK
Model : TL-WR340GD
Category : Router