Pro-LITE 2.0 DSP - Receiver CREST AUDIO - Free user manual and instructions
Find the device manual for free Pro-LITE 2.0 DSP CREST AUDIO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Professional Audio Receiver with DSP |
| Brand | Crest Audio |
| Model | Pro-LITE 2.0 DSP |
| Power Output | 2 x 500W RMS at 4 ohms |
| Number of Channels | 2 |
| Digital Signal Processing | 24-bit / 48kHz with adjustable EQ, crossover, and delay |
| Frequency Response | 20 Hz - 20 kHz (±0.5 dB) |
| Total Harmonic Distortion | < 0.05% at rated power |
| Inputs | Balanced XLR, 1/4" TRS, and unbalanced RCA |
| Outputs | Speakon connectors and binding post terminals |
| Signal-to-Noise Ratio | > 100 dB |
| Front Panel Controls | Volume knobs, LCD display, and push-button navigation |
| Cooling System | Dual variable-speed fans with rear-to-front airflow |
| Protection Features | Short circuit, overcurrent, overvoltage, and thermal protection |
| Power Supply | 100-240V AC, 50/60 Hz (auto-switching) |
| Dimensions (W x H x D) | 483 x 88 x 320 mm (19" rack mountable, 2U) |
| Weight | 8.5 kg (18.7 lbs) |
| Chassis Material | 3 mm steel with corrosion-resistant coating |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Included Accessories | Power cord, user manual, and rack mount kit |
| Maintenance | Wipe with dry cloth; keep vents free of dust |
| Safety Compliance | CE, UL, and FCC certified |
| Repairability | Modular input/output boards and replaceable fan assemblies |
| Warranty | 3-year limited warranty from Crest Audio |
Frequently Asked Questions - Pro-LITE 2.0 DSP CREST AUDIO
How do I connect my Crest Audio Pro-LITE 2.0 DSP receiver to speakers?
Use Speakon or binding post connectors on the rear panel. Ensure the receiver is powered off, connect the positive and negative terminals to your speakers, and then power on. For bridged mono operation, connect the positive terminal of Channel 1 and the negative terminal of Channel 2 to the speaker.
What is the maximum power output of the Pro-LITE 2.0 DSP?
The Pro-LITE 2.0 DSP delivers 2 x 500W RMS into 4 ohms, or 2 x 300W RMS into 8 ohms. In bridged mode, it can provide up to 1000W RMS into 8 ohms.
Can I adjust the equalizer using the built-in DSP?
Yes, the DSP allows you to adjust parametric EQ for each channel independently. You can access the settings via the front panel LCD and navigation buttons. For detailed instructions, refer to the manual's DSP section.
How do I perform a factory reset on the receiver?
To reset to factory defaults, power off the unit, then press and hold the MENU button while turning the power on. Keep holding until the display shows 'Reset'. Confirm with the ENTER button. This will erase all custom DSP presets.
What cables and accessories are included with the product?
The package includes a standard IEC power cord, a physical user manual, and a rack mount kit with screws. No audio cables are included, so you will need to purchase XLR or 1/4" cables separately.
Is the Power Supply compatible with both 110V and 220V outlets?
Yes, the built-in power supply automatically accepts 100-240V AC, 50/60 Hz. This means you can use it worldwide without needing a voltage converter.
How should I clean and maintain my Pro-LITE 2.0 DSP?
Disconnect the unit from power before cleaning. Use a soft dry cloth to wipe the exterior and front panel. Periodically remove dust from the front and rear ventilation grilles using a vacuum cleaner. Avoid using solvents or abrasive cleaners.
Can I bridge the amplifier to operate in mono mode?
Yes, the Pro-LITE 2.0 DSP supports bridged mono operation. Set the mode switch (near the input connectors) to 'Bridge' or use the DSP menu. Connect the speaker as described in the manual: positive to the left channel's positive terminal and negative to the right channel's negative terminal.
Where can I find the full user manual for this receiver?
The physical manual is included in the box. Alternatively, you can download a PDF version from the Crest Audio official website or from the notice-facile.com page for this device. The manual is also available in multiple languages.
What is the warranty coverage and duration?
Crest Audio provides a 3-year limited warranty covering defects in materials and workmanship under normal use. This does not cover damage from misuse, accidents, or unauthorized modifications. Keep your sales receipt as proof of purchase.
User questions about Pro-LITE 2.0 DSP CREST AUDIO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual Pro-LITE 2.0 DSP - CREST AUDIO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Pro-LITE 2.0 DSP by CREST AUDIO.
USER MANUAL Pro-LITE 2.0 DSP CREST AUDIO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CREST AUDIO
Model : Pro-LITE 2.0 DSP
Category : Receiver