EXP Series - Bicycles BodyCraft - Free user manual and instructions
Find the device manual for free EXP Series BodyCraft in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Indoor Exercise Bicycle |
| Model / Series | EXP Series |
| Brand | BodyCraft |
| Frame Material | Heavy-duty steel |
| Dimensions (L x W x H) | 48 x 22 x 44 in (122 x 56 x 112 cm) |
| Product Weight | 85 lbs (38.5 kg) |
| Maximum User Weight | 300 lbs (136 kg) |
| Flywheel Weight | 35 lbs (15.9 kg) |
| Resistance System | Adjustable friction belt |
| Drive System | Quiet belt drive |
| Pedals | Adjustable with toe cages |
| Seat Adjustment | Horizontal and vertical |
| Handlebar Adjustment | Vertical and multi-grip |
| Display | LCD showing time, distance, speed and calories |
| Heart Rate Monitor | Pulse grip sensors |
| Power Source | 2 AA batteries (not included) |
| Transport Wheels | Yes |
| Bottle Holder | Yes |
| Assembly | Required (2 people recommended) |
| Leveling | Adjustable stabilizers |
Frequently Asked Questions - EXP Series BodyCraft
How do I assemble my BodyCraft EXP Series bicycle?
Lay out all parts and tools. Attach the front and rear stabilizers to the main frame, then install the seat post and seat, handlebars, pedals, and console. Tighten all bolts with the provided hex tools. Always place a mat under the bike and ensure stabilizers are level.
How do I adjust the resistance on my EXP Series bike?
Turn the resistance knob clockwise to increase the resistance and counterclockwise to decrease. Friction belt resistance offers smooth, continuous adjustment and is ideal for interval training.
How do I adjust the seat to fit my height?
Loosen the seat adjustment knob, slide the seat post up or down to the desired height, then tighten firmly. Check that the seat is positioned correctly: your leg should have a slight bend at the bottom of the pedal stroke.
How do I move the bike?
Tilt the bike forward using the rear handles until the transport wheels contact the floor, then roll it to the desired location. Make sure the resistance knob is not in a locked position.
How do I monitor my heart rate?
Grip the pulse sensors on the handlebars with both hands. The LCD screen will display your heart rate in beats per minute after a few seconds. Keep your hands still for an accurate reading.
What type of battery does the console require?
The console requires two AA batteries (not included). Insert them in the battery compartment on the back of the console, ensuring correct polarity, and replace the cover.
How do I clean and maintain my exercise bike?
Wipe the frame, seat, and handlebars with a damp cloth after each workout. Check and tighten all bolts and screws weekly. Periodically lubricate the drive belt and friction pad with silicone spray, following the manual instructions.
What is the maximum user weight for the EXP Series?
The EXP Series supports up to 300 lbs (136 kg). Do not exceed this limit to ensure safety and prolong the life of the bike.
How much floor space do I need?
The bike footprint is approximately 48 x 22 inches (122 x 56 cm). Leave at least 2 feet of clearance on all sides for safe and comfortable training.
My bike makes a squeaking noise during use. What should I do?
Squeaks are often caused by loose pedals, seat post, or handlebar adjustments. Tighten all quick-release knobs and bolts. If the noise persists, lubricate the moving parts with a light lubricant and contact customer support for further assistance.
User questions about EXP Series BodyCraft
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Bicycles in PDF format for free! Find your manual EXP Series - BodyCraft and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EXP Series by BodyCraft.