VTD-THD5R2 - Surveillance Camera Vitek - Free user manual and instructions
Find the device manual for free VTD-THD5R2 Vitek in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Vitek |
| Model | VTD-THD5R2 |
| Product Type | Surveillance Camera |
| Image Sensor | 1/2.7" CMOS |
| Resolution | 5MP (2560x1920) |
| Video Output | HD-TVI / AHD / CVI / CVBS switchable |
| Minimum Illumination | 0.01 Lux (color), 0.001 Lux (B/W) |
| Lens Type | Fixed 3.6mm, F1.6 |
| Angle of View | 80° horizontal |
| Night Vision | Up to 20m, 18 IR LEDs |
| Weatherproof Rating | IP67 |
| Power Supply | 12V DC, 500mA |
| Power Consumption | 4W max |
| Operating Temperature | -10°C to +50°C |
| Housing Material | Die-cast aluminum |
| Dimensions | Φ110 × 95 mm |
| Weight | 0.45 kg |
| Signal-to-Noise Ratio | ≥50 dB |
| Backlight Compensation | BLC / HLC / WDR |
| Day/Night Mode | Auto / Color / B/W |
| Maintenance | Clean lens with dry cloth; avoid solvents |
| Safety | Use only regulated 12V DC supply |
| Spare Parts & Repairability | Available from authorized service centers |
| General Information | Free manual downloadable from notice-facile.com |
Frequently Asked Questions - VTD-THD5R2 Vitek
How do I connect the Vitek VTD-THD5R2 camera to a DVR?
Connect the camera using a coaxial RG59 cable (or UTP with balun) to the DVR's BNC input. For TVI mode, ensure the DVR supports HD-TVI and set the camera to TVI output using the switch inside the camera. Power it with a 12V DC adapter.
What is the default password for accessing camera settings?
The default admin password is often 123456 or empty. Try these common defaults; if they fail, press the reset button for 10 seconds to restore factory settings.
How can I switch between TVI and AHD output modes?
Open the camera housing and locate the 4-pin switch. Set the DIP switches according to the desired format (TVI, AHD, CVI, or CVBS). After switching, reconnect the power and check the image on your monitor.
How do I perform a factory reset on the VTD-THD5R2?
Disconnect power, press and hold the reset button (small pinhole) while reapplying power. Keep it pressed for 10 seconds. The camera will reboot with default settings and IP configuration.
How should I clean the camera lens and housing?
Use a soft, lint-free microfiber cloth slightly dampened with pure water or a lens cleaning solution. Do not use abrasive chemicals. Wipe the dome or lens gently in circular motions, then dry with a clean cloth.
What power supply does the Vitek VTD-THD5R2 require?
The camera operates on 12V DC with a typical consumption of 4W (up to 6W with IR LEDs). Use a regulated power adapter delivering at least 1A to ensure stable operation.
Can I install this camera outdoors?
Yes, the housing is rated IP67 weatherproof, so it is fully protected against dust and strong jets of water. Use proper waterproof connector caps for all cable connections to maintain protection.
How do I access live view on my smartphone?
Connect the camera to a compatible DVR/NVR with network access. Use the manufacturer's mobile app (e.g., Vitek Mobile), scan the QR code or manually add the device, and enter your DDNS or IP address.
How to enable motion detection alerts?
In the DVR or camera menu, navigate to Motion Detection, enable the function, and draw detection zones. Set the sensitivity and scheduling. Configure push notifications in the mobile app to receive alerts.
How do I update the firmware of my Vitek camera?
Visit the official Vitek website and download the latest firmware for VTD-THD5R2. Save the file to a USB drive, insert it into the DVR's USB port, and follow the DVR's Firmware Upgrade menu instructions.
User questions about VTD-THD5R2 Vitek
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Surveillance Camera in PDF format for free! Find your manual VTD-THD5R2 - Vitek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VTD-THD5R2 by Vitek.