FOX3 T 111 - Uncategorized Extron - Free user manual and instructions
Find the device manual for free FOX3 T 111 Extron in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 3G-SDI Fiber Optic Transmitter |
| Brand | Extron |
| Model | FOX3 T 111 |
| Video Input | 1 x 3G-SDI (BNC) |
| Fiber Connector | 1 x LC duplex |
| Maximum Transmission Distance | Up to 10 km over singlemode fiber |
| Supported Resolutions | SD/HD/3G-SDI up to 1080p @ 60 Hz |
| Audio Support | Embedded SDI audio passthrough |
| Control Interface | RS-232 transparent transmission |
| Power Supply | 12V DC, external power supply |
| Power Consumption | 5W (typical) |
| Dimensions (H x W x D) | 1.7" H x 4.3" W x 3.0" D |
| Weight | 1.5 lbs (0.7 kg) |
| Enclosure Type | Metal, black |
| Operating Temperature | 32°F to 122°F (0°C to 50°C) |
| Storage Temperature | -40°F to 158°F (-40°C to 70°C) |
| Included Accessories | 12V power supply, mounting kit |
| Mounting Options | Rack-mountable with optional kit, or shelf-mountable |
| Warranty | 3 years |
| Compliance | CE, UL |
Frequently Asked Questions - FOX3 T 111 Extron
What is the Extron FOX3 T 111?
The FOX3 T 111 is a 3G-SDI fiber optic transmitter designed to extend SDI signals over long distances using singlemode or multimode fiber.
What type of fiber optic cable does it use?
It uses LC duplex connectors and supports both singlemode and multimode fiber optic cables.
What is the maximum transmission distance?
With singlemode fiber, it can transmit up to 10 kilometers without signal loss.
Does it support 4K resolution?
No, this model supports 3G-SDI signals up to 1080p @ 60 Hz and does not handle 4K.
How do I connect the FOX3 T 111?
Connect your SDI source to the BNC input, run a fiber optic cable from the LC connector to a compatible receiver, and power the unit using the included 12V adapter.
Can I control the transmitter remotely?
Yes, it supports RS-232 control which can be transmitted transparently through the fiber link.
Does it support power over fiber?
No, the FOX3 T 111 requires a separate 12V DC power supply at the transmitter location.
What should I do if there is no signal at the receiver?
Check that both units are powered, the fiber cable is correctly connected, the SDI input is active, and the fiber is not damaged. Also verify that the distance is within the rated limit.
Is it compatible with my SDI camera?
If your camera outputs SDI (SD, HD, or 3G) up to 1080p, it is compatible. Ensure the SDI signal format is supported and the cabling meets requirements.
How do I update the firmware?
Firmware updates are performed via the RS-232 port using Extron PCS (Product Configuration Software). Download the latest firmware from the Extron website and follow the included instructions.
User questions about FOX3 T 111 Extron
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual FOX3 T 111 - Extron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FOX3 T 111 by Extron.
USER MANUAL FOX3 T 111 Extron
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Extron
Model : FOX3 T 111
Category : Uncategorized