X11DPi-NT - Motherboard Supermicro - Free user manual and instructions
Find the device manual for free X11DPi-NT Supermicro in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Motherboard |
| Brand | Supermicro |
| Model | X11DPi-NT |
| Form Factor | E-ATX (12" x 10.2") |
| Dimensions | 30.5 cm x 26.0 cm |
| Weight | Approximately 2.3 kg (5 lbs) |
| CPU Socket | Dual Socket P (LGA 3647) |
| Chipset | Intel C621 |
| Memory Support | 16 DIMM slots, DDR4 ECC up to 2 TB |
| Expansion Slots | 7x PCIe 3.0 x16 slots |
| Networking | Dual 10GBase-T (10GbE) LAN ports |
| Management | IPMI 2.0 with dedicated LAN port |
| SATA Storage | 14x SATA3 ports, support RAID 0/1/5/10 |
| M.2 Support | 2x M.2 slots (PCIe 3.0 x4) |
| Power Connectors | 24-pin ATX, 16-pin, 8-pin EPS |
| Cooling | Multiple fan headers with thermal control |
| USB Ports | 2x USB 3.0, 2x USB 2.0, plus onboard headers |
| Maintenance | Clear CMOS jumper, BIOS recovery, diagnostic LEDs |
| Safety | Overheat protection, short-circuit protection, ESD protection |
| Spare Parts & Repairability | User replaceable battery, sockets, and cooling fans |
| General Information | Supports Intel Xeon Scalable processors, ideal for enterprise servers |
Frequently Asked Questions - X11DPi-NT Supermicro
What processors are compatible with the Supermicro X11DPi-NT?
The motherboard supports Intel Xeon Scalable processors with Socket P (LGA 3647). It is compatible with both Skylake-SP and Cascade Lake-SP generations.
How many memory slots does the X11DPi-NT have?
The board features 16 DIMM slots for DDR4 ECC memory, supporting up to 2 TB when populated with 128 GB modules.
Does the X11DPi-NT support NVMe drives?
Yes, it includes M.2 slots that support PCIe 3.0 x4 NVMe SSDs. Additionally, the PCIe slots can be used with NVMe storage via adapters.
What is the maximum number of PCIe cards that can be installed?
The board provides 7 PCIe 3.0 x16 slots, but the number of usable slots may depend on the CPU model and power budget.
How do I update the BIOS on this motherboard?
You can update the BIOS using the IPMI web interface of the board (upload a firmware file) or via a USB stick with a DOS/EFI flash utility. Always backup the current BIOS before updating.
What power supply requirements does the X11DPi-NT have?
The motherboard requires a 24-pin ATX power connector and at least one 8-pin EPS 12V connector. For dual CPUs, two CPU power connectors are needed. A high-wattage server PSU is recommended.
Does the X11DPi-NT support IPMI remote management?
Yes, it features a dedicated IPMI 2.0 management port and integrated BMC for out-of-band control, including power on/off, console redirection, and sensor monitoring.
What is the supported memory speed?
Memory speed depends on the CPU. With supported Xeon Scalable processors, the board can run DDR4 at up to 2666 MHz or 2933 MHz depending on the CPU generation.
Are there any troubleshooting steps if the system does not boot?
Check the diagnostic LEDs on the board, ensure all power connectors are seated, verify CPU and memory installation, clear the CMOS via jumper, and test with minimal components (one CPU, one DIMM).
Can I use this motherboard in a standard desktop case?
It is an E-ATX motherboard (12 x 10.2 inches). Ensure your case supports E-ATX or larger, and that your power supply meets the server-grade requirements.
User questions about X11DPi-NT Supermicro
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Motherboard in PDF format for free! Find your manual X11DPi-NT - Supermicro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. X11DPi-NT by Supermicro.
USER MANUAL X11DPi-NT Supermicro
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Supermicro
Model : X11DPi-NT
Category : Motherboard