SM15V - Loudspeaker YAMAHA - Free user manual and instructions
Find the device manual for free SM15V YAMAHA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 2-Way Passive Stage Monitor |
| Brand | Yamaha |
| Model | SM15V |
| Configuration | Passive |
| Speaker Driver | 15" Woofer + 1" Compression Driver |
| Impedance | 8 Ohms |
| Power Rating | 350W AES / 700W Peak |
| Frequency Response | 55 Hz - 20 kHz |
| Sensitivity | 98 dB SPL (1W/1m) |
| Recommended Amplifier Power | 500W to 700W RMS |
| Coverage Angle | 90° Horizontal x 50° Vertical |
| Dimensions (H x W x D) | 430 mm x 660 mm x 400 mm |
| Weight | 19.5 kg (43 lbs) |
| Enclosure Material | Plywood with Black Carpet Finish |
| Grille | Perforated Steel Mesh |
| Connectors | 2 x Speakon (Pin 2+ / 2-) |
| Monitor Angle | Adjustable Wedge Design for Floor Monitoring |
| Protection | Internal Crossover with HF Driver Protection |
| Cabinet Type | Bass Reflex with Rear Port |
| Cleaning Instructions | Use a soft dry cloth; avoid moisture and solvents |
| Safety Features | Rubber Side Feet and Reinforced Corners |
| Repairability | Replacement drivers and crossover available via Yamaha service centers |
Frequently Asked Questions - SM15V YAMAHA
What is the power handling of the Yamaha SM15V?
The Yamaha SM15V has a power rating of 350W AES and 700W peak, making it suitable for medium-sized venues and monitoring stalls.
How do I connect the SM15V to my amplifier?
Use the two Speakon connectors on the back of the speaker with a standard 2-conductor cable (pins 2+ and 2-). Ensure the amplifier is switched off before connecting.
Can I use the SM15V as a main PA speaker?
Yes, the SM15V can be used as a full-range main speaker, though it is primarily designed as a floor monitor. For larger shows, we recommend pairing it with a subwoofer.
What is the optimal placement for a stage monitor?
Place the monitor on the floor at a 30-45 degree angle relative to the performer, pointing toward the artist's ears or the required coverage area.
How should I clean the loudspeaker cabinet?
Use a soft, dry cloth to wipe the cabinet and grille. Avoid water, solvents, and compressed air, which may damage the drivers or the finish.
What amplifier power do I need for the SM15V?
A recommended amplifier delivering 500W to 700W RMS at 8 ohms will provide adequate headroom without exceeding the speaker's power rating.
Does the SM15V have a built-in crossover?
Yes, the SM15V includes an internal passive crossover that routes high frequencies to the compression driver and low frequencies to the woofer, so no external crossover is required.
Is the SM15V a full-range speaker?
Yes, it covers a frequency range of 55 Hz to 20 kHz, reproducing the full audio spectrum without additional units in most applications.
Can I use the SM15V with a subwoofer?
Absolutely. By connecting the SM15V to a subwoofer via the daisy-chain output or external crossover, you can extend the low-frequency response below 55 Hz and increase overall output.
What safety precautions should I take when using the SM15V?
Always place the monitor on a stable surface and secure cables to prevent tripping. Avoid over-driving the speaker and ensure the amplifier output power does not exceed the speaker's peak power rating. Wait for the system to be muted before connecting or disconnecting cables.
User questions about SM15V YAMAHA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual SM15V - YAMAHA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SM15V by YAMAHA.
USER MANUAL SM15V YAMAHA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : YAMAHA
Model : SM15V
Category : Loudspeaker