MIC2013UI - Heat pump DIMPLEX - Free user manual and instructions
Find the device manual for free MIC2013UI DIMPLEX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Portable heat pump (air-to-air) |
| Brand | Dimplex |
| Model | MIC2013UI |
| Energy efficiency class | A++ (cooling) / A+ (heating) |
| Cooling capacity | 2.6 kW (9,000 BTU/h) |
| Heating capacity | 3.2 kW (11,000 BTU/h) |
| Power supply | 230 V / 50 Hz |
| Power consumption (cooling) | 0.85 kW |
| Power consumption (heating) | 0.95 kW |
| Refrigerant type | R290 (flammable, eco-friendly) |
| Dehumidification capacity | 1.2 L/h |
| Airflow rate | 320 m³/h |
| Noise level (max.) | 65 dB(A) |
| Operating temperature range | -5°C to 43°C (cooling), -5°C to 30°C (heating) |
| Filter type | Washable anti-dust filter |
| Control / display | Digital display with remote control |
| Timer | 24-hour programmable timer |
| Wi-Fi connectivity | Yes, smart device control |
| Dimensions (W x D x H) | 320 x 330 x 700 mm |
| Weight | 24 kg |
| Maintenance | Clean or replace air filters every 2 weeks; inspect drain system monthly |
| Security features | Automatic switch-off on overheat, tip-over protection |
| Spare parts and repairability | Spare parts available for 7 years; repairability index 8.1/10 |
| Manual | 59-page user manual in English, free download |
Frequently Asked Questions - MIC2013UI DIMPLEX
How to install the exhaust hose?
Connect the exhaust hose to the unit's rear outlet and lead it out through an open window or a wall hole. Ensure the hose is not bent or extended more than 1.5 m to avoid pressure buildup and reduced efficiency.
Can I use this heat pump for heating in winter?
Yes, the MIC2013UI can operate as a heater down to -5°C outdoor temperature. For colder climates, consider a supplementary heating source because the heating output may be limited below -5°C.
How to clean the air filters?
Turn off the unit, remove the air intake grille and slide out the filter. Wash with warm soapy water, rinse and let it dry completely before reinstalling. Clean the filter every 2 weeks for optimal performance.
What type of refrigerant does it use?
The unit uses R290 (propane), which is a natural and eco-friendly refrigerant. It is flammable, so installation and maintenance must be carried out by certified professionals when the circuit is opened.
Why is water leaking and how do I drain it?
During dehumidification or cooling, the unit collects water. If the internal tank is full, it automatically stops. Use the continuous drain hose connected to the drain port for continuous emptying, or manually empty the tank when the indicator lights up.
Does this heat pump have smart connectivity?
Yes, the UI model features built-in Wi-Fi. Download the official Dimplex app to control temperature, timers and modes remotely via your smartphone, and integrate it with voice assistants.
What is the safe operating temperature range?
For cooling, use it between 18°C and 43°C indoor temperature. For heating, the range is -5°C to 30°C ambient temperature. Operating outside these ranges may trigger error codes and reduce reliability.
How to set the 24-hour timer?
Press the TIMER button on the remote or panel. Set the desired turn-on or turn-off time using + and – buttons. The unit will count down and automatically start or stop at the programmed time. You can also combine with temperature settings.
Does the unit have a defrost function?
Yes, when the outdoor coil gets frosted during heating, the unit automatically enters defrost mode for 2-3 minutes. The fan slows down and the compressor reverses briefly to melt the ice. This is normal and helps maintain efficiency.
What does error code E1 mean?
The E1 error indicates a room temperature sensor failure. Check if the unit is blocked by foreign objects, then unplug it for 5 minutes and restart. If the error persists, contact Dimplex support; the sensor may need replacement.
User questions about MIC2013UI DIMPLEX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heat pump in PDF format for free! Find your manual MIC2013UI - DIMPLEX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MIC2013UI by DIMPLEX.
USER MANUAL MIC2013UI DIMPLEX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DIMPLEX
Model : MIC2013UI
Category : Heat pump