TP-573 - Audio/video extension Kramer - Free user manual and instructions
Find the device manual for free TP-573 Kramer in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | DVI over Twisted Pair Transmitter |
| Video Input | 1 DVI-I (digital) |
| Video Output | 1 DVI-I loop, 1 RJ-45 (twisted pair) |
| Supported Resolutions | Up to 1920x1200 @60Hz |
| Transmission Distance | Up to 100 meters via CAT5e/CAT6 |
| Power Supply | 12V DC, 330mA |
| Dimensions (W x D x H) | 12.0cm x 7.2cm x 2.5cm |
| Weight | 0.4kg |
| Chassis Type | Desktop |
| LED Indicators | Power, Link |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 10% to 90% RH (non-condensing) |
| Signal Type | DVI-D digital |
| Cable Type | CAT5e or CAT6 STP/UTP |
| Maintenance | Clean with dry soft cloth; avoid solvents |
| Safety | Use only supplied 12V adapter; keep away from liquids |
| Spare Parts & Repairability | Replacement power adapter available; service by authorized technicians |
| General Information | Plug-and-play installation; no software required |
Frequently Asked Questions - TP-573 Kramer
What is the maximum transmission distance of the Kramer TP-573?
The TP-573 can transmit DVI signals up to 100 meters over a single CAT5e/CAT6 twisted pair cable.
Does the TP-573 support audio transmission?
No, the TP-573 is designed for video only. It does not transmit audio signals. For audio plus video over twisted pair, consider other Kramer models.
Can I use the loop output on the transmitter simultaneously with the twisted pair output?
Yes, the loop output allows you to connect a local monitor while the same DVI signal is sent to a remote receiver via the RJ-45 output.
What type of twisted pair cable should I use?
Use a CAT5e or CAT6 cable with solid conductors for best results. Shielded twisted pair (STP) is recommended to minimize interference.
How do I connect the TP-573 to my DVI source?
Connect your DVI source (e.g., PC, laptop) to the DVI-IN port on the TP-573. Then connect a twisted pair cable from the RJ-45 OUT to the matching receiver. Optionally, connect a display to the DVI LOOP output.
Does the TP-573 require installing any drivers or software?
No, the TP-573 is a plug-and-play device. It requires no drivers or software installation.
What video resolutions are supported?
The TP-573 supports resolutions up to 1920x1200 @ 60Hz, including 1080p and WUXGA.
Can I connect a VGA source to the TP-573?
The TP-573 accepts only DVI signals. If your source has VGA output, you will need an active VGA-to-DVI converter.
How can I tell if the TP-573 is powered on?
The Power LED on the front panel will illuminate when the unit is connected to a suitable 12V DC power supply. The Link LED indicates a valid connection with the receiver.
What is the difference between the TP-573 and the TP-574?
The TP-573 is a transmitter that sends DVI signals over twisted pair, while the TP-574 is the companion receiver that converts the twisted pair signal back to DVI for display.
User questions about TP-573 Kramer
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Audio/video extension in PDF format for free! Find your manual TP-573 - Kramer and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TP-573 by Kramer.
USER MANUAL TP-573 Kramer
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Kramer
Model : TP-573
Category : Audio/video extension