Murelle Equipe 70 ErP - Loudspeaker SIME - Free user manual and instructions
Find the device manual for free Murelle Equipe 70 ErP SIME in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Floor-standing gas boiler for heating and domestic hot water |
| Brand | SIME |
| Model | Murelle Equipe 70 ErP |
| Energy source | Natural gas (G20) or LPG (G31) |
| Heat output | 70 kW (adjustable to suit system demand) |
| Efficiency | High efficiency, compliant with ErP directive |
| NOx emissions | Low NOx class 6 |
| Heat exchanger | Cast iron section, durable and corrosion resistant |
| Flue system | Forced draught, suitable for vertical or horizontal flue |
| Max operating pressure | 6 bar |
| Max water temperature | 90°C |
| Electrical supply | 230V / 50Hz |
| Electrical consumption | 200 W |
| Dimensions (H x W x D) | 1040 x 700 x 1000 mm |
| Weight | 320 kg |
| Control panel | User-friendly temperature control and diagnostics |
| Safety features | Overheat protection, gas pressure switch, flame sensor, safety valve |
| Maintenance | Yearly service recommended by a qualified technician |
| Spare parts | Genuine SIME spare parts available |
| Warranty | 2 years for domestic use |
Frequently Asked Questions - Murelle Equipe 70 ErP SIME
How do I install the SIME Murelle Equipe 70 ErP boiler?
Installation must be carried out by a Gas Safe registered engineer. Ensure the boiler is positioned on a level, non-flammable surface and connected to a suitable flue system. Check gas supply pressure and water flow rates before commissioning.
What is the minimum clearance required around the boiler?
Keep at least 600 mm clearance at the front for maintenance, 300 mm on both sides and 500 mm above. Also ensure adequate ventilation if required.
Can this boiler be used with underfloor heating?
Yes, when fitted with a suitable mixing valve to limit the flow temperature. The boiler can provide low temperature water for underfloor systems via a thermostatic mixing valve.
How often should I have the boiler serviced?
Annual servicing by a qualified technician is essential to maintain efficiency and warranty. The technician should clean the heat exchanger, check gas pressure, combustion and safety devices.
What should I do if the boiler loses pressure?
Check the pressure gauge; if below 1 bar, use the filling loop to add water until it reaches 1.5 bar. If pressure drops frequently, there may be a leak or expansion vessel fault.
Is the boiler suitable for LPG?
Yes, the boiler can be converted to LPG using the appropriate conversion kit. Consult an engineer to carry out the conversion and adjust the gas valve.
How can I reduce the noise from the boiler?
Noise may come from burner combustion or water flow. Ensure the boiler is serviced and the system is bled to remove trapped air. Also check pump speed settings.
What does ErP mean in the model name?
ErP stands for Energy-related Products directive, which sets efficiency and emission standards. This boiler meets the latest ErP requirements.
How do I light the pilot flame?
This model features an electronic ignition system, so there is no permanent pilot flame. The boiler automatically ignites when heat is required.
How can I obtain spare parts?
Spare parts are available from authorized SIME distributors or online parts suppliers. Always use genuine SIME parts to ensure optimal performance and warranty validity.
User questions about Murelle Equipe 70 ErP SIME
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual Murelle Equipe 70 ErP - SIME and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Murelle Equipe 70 ErP by SIME.