Studiomaster T77 - Turntable REVOX - Free user manual and instructions
Find the device manual for free Studiomaster T77 REVOX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Turntable |
| Brand | REVOX |
| Model | Studiomaster T77 |
| Drive System | Belt drive |
| Speeds | 33 1/3 and 45 RPM |
| Wow and Flutter | Less than 0.08% |
| Signal to Noise Ratio | More than 60 dB |
| Platter | 300 mm aluminum alloy |
| Tonearm | Static balance S-shaped |
| Tracking Force Range | 1.5 - 3.0 g |
| Cartridge Type | Moving Magnet (MM) |
| Output Level | 3.5 mV (typical) |
| Output Connectors | RCA phono |
| Power Supply | AC 230V, 50 Hz |
| Power Consumption | Approx. 12 W |
| Dimensions (W x D x H) | 460 x 360 x 160 mm |
| Weight | 8.5 kg |
| Maintenance | Clean platter and dust cover with soft cloth |
| Safety | Operate only on stable surface; avoid water |
| Replaceable Parts | Stylus, belt, and cartridge |
Frequently Asked Questions - Studiomaster T77 REVOX
How do I connect the Studiomaster T77 to my amplifier?
Connect the RCA cables from the turntable's output jacks to the phono input on your amplifier. If your amplifier lacks a phono input, you will need an external preamp to equalize the signal.
What is the recommended tracking force for the cartridge?
Set the tracking force between 1.5 and 3.0 grams depending on your cartridge. Use a stylus force gauge to adjust the counterweight on the tonearm precisely.
How do I change the belt?
First remove the platter from the spindle. Then carefully replace the old drive belt with a new one around the motor pulley and the inner ring of the platter. Check that the belt does not twist before reassembling.
How do I replace the stylus?
Replace the stylus by gently pulling the old one downward from the cartridge body. Push the new stylus upward until it clicks into place. Ensure the cartridge pins align properly to avoid damage.
Why is the turntable not producing any sound?
Verify that the tonearm is set down on the record and that the phono preamp is correctly selected. Check the RCA connections and make sure the amplifier's input is not muted. Also confirm the stylus is not worn out.
How should I clean the turntable?
Use a soft, dry cloth to wipe the platter and dust cover. For the stylus, use a dedicated stylus brush with a gentle brushing motion from the back to the front. Avoid using water or cleaning chemicals on the tonearm.
Does the turntable have a built-in preamp?
No, the Studiomaster T77 does not include a built-in phono preamp. You must connect it to a phono stage either in your amplifier or as an external unit.
How do I switch between 33 and 45 RPM?
Use the speed selector switch located near the platter to alternate between 33 1/3 and 45 RPM. Some models may have a pitch control for fine adjustment.
What should I do if the platter does not rotate?
First check that power is supplied to the turntable and that the belt is still on. If the belt appears loose or broken, replace it. Also ensure an object is not blocking the motor pulley.
How do I store the turntable when not in use?
Always replace the dust cover and remove the power plug when not in use. Keep the turntable in a dry, dust-free environment away from direct sunlight and heat sources.
User questions about Studiomaster T77 REVOX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Turntable in PDF format for free! Find your manual Studiomaster T77 - REVOX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Studiomaster T77 by REVOX.