GRUNDIG

GTP4823M - Tumble dryer GRUNDIG - Free user manual and instructions

Find the device manual for free GTP4823M GRUNDIG in PDF.

📄 36 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice GRUNDIG GTP4823M - page 4
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Tumble Dryer with Heat Pump Technology
Brand Grundig
Model Number GTP4823M
Capacity 8 kg
Dimensions (H x W x D) 85 cm x 60 cm x 60 cm
Weight 45 kg
Energy Efficiency Class A++
Noise Level 65 dB(A)
Power Supply 220-240 V, 50 Hz
Rated Power 800 W
Drying Sensor Automatic moisture sensor
Drying Programmes 15+ programmes including Cotton, Synthetic, Delicates, Wool, and Quick 30 min
Special Functions Anti-Crease, Delayed Start, Child Lock, Rapid Dry
Drum Material Stainless steel
Filter Fluff filter with cleaning indicator
Water Tank Collects condensed water with full tank indicator
Installation Freestanding, suitable for under worktop
Controls LED display with rotary dial and touch buttons
Maintenance Easy access to fluff filter and condenser for regular cleaning
Safety Features Child lock, overheat protection, door safety lock
Spare Parts Genuine Grundig parts available for 10 years
Accessories Drain hose for direct water outlet
Warranty 2 years manufacturer warranty

Frequently Asked Questions - GTP4823M GRUNDIG

How do I install the Grundig GTP4823M tumble dryer?
Place the dryer on a stable surface and ensure at least 10 cm clearance around it for ventilation. Connect the power cord to a grounded outlet. If using the water tank, insert it correctly; for direct drainage, attach the provided hose.
What is the maximum load capacity?
The GTP4823M has a maximum capacity of 8 kg for cotton drying. Do not exceed this to ensure optimal drying performance and avoid damage.
How often should I clean the fluff filter?
Clean the fluff filter after every cycle. Remove lint and rinse if necessary. A blocked filter can reduce airflow and increase drying time.
Can I dry delicate fabrics?
Yes, use the dedicated Delicates programme with a low temperature. Always check care labels and avoid drying wool or silk unless specified.
How does the heat pump technology work?
The heat pump dryer recycles hot air efficiently using a refrigerant system to condense moisture. This allows lower drying temperatures and reduces energy consumption.
What should I do if the dryer does not start?
Check the power supply, door closure, and programme setting. Make sure the water tank is empty and the filters are clean. If the issue persists, contact service.
Is a vent required for installation?
No, the GTP4823M is a condenser dryer with a water tank. You can also connect a drain hose for continuous water removal, but no external vent is needed.
How long does the quick drying programme take?
The Quick 30 programme dries a small load of about 2 kg in 30 minutes. For larger loads, drying times vary based on fabric and moisture.
How do I enable the child lock?
Press and hold the child lock button for 3 seconds. The indicator lights up, disabling the controls to prevent accidental changes during drying.
What maintenance is required for the condenser?
The condenser should be cleaned every 30 cycles or as indicated by the dryer. Access the condenser, flush it with water, and dry it before replacing.

User questions about GTP4823M GRUNDIG

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Tumble dryer in PDF format for free! Find your manual GTP4823M - GRUNDIG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GTP4823M by GRUNDIG.

USER MANUAL GTP4823M GRUNDIG

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : GRUNDIG

Model : GTP4823M

Category : Tumble dryer