SLSRRD-AB - Shower head ThermaSol - Free user manual and instructions
Find the device manual for free SLSRRD-AB ThermaSol in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Shower Head |
| Brand | ThermaSol |
| Model | SLSRRD-AB |
| Material | ABS plastic with chrome finish |
| Finish | Chrome |
| Connection Size | Standard 1/2 inch thread |
| Number of Spray Modes | 3 (rain, massage, mist) |
| Flow Rate | 5.5 L/min at standard water pressure |
| Water Pressure Range | 15-100 psi (1-7 bar) |
| Dimensions | 10 x 10 x 20 cm (approx.) |
| Weight | 0.4 kg |
| Included Components | Shower head, silicone washer, user manual |
| Installation Type | Wall-mounted or handheld (dual position) |
| Compatibility | Standard shower hoses and arms |
| Maintenance | Regular descaling to prevent limescale build-up |
| Cleaning Instructions | Wipe with a soft cloth and mild soap; avoid abrasive cleaners |
| Safety Features | Anti-scald design with heat-resistant body |
| Certifications | CE compliant |
| Warranty | 2-year limited warranty |
| Spare Parts Availability | O-rings and washers available separately |
Frequently Asked Questions - SLSRRD-AB ThermaSol
How do I install the ThermaSol SLSRRD-AB shower head?
Remove your old shower head, apply plumber's tape to the shower arm threads, screw on the new shower head by hand, and then tighten with a wrench. Make sure the silicone washer is in place to prevent leaks.
What water pressure does it need?
It works best with a water pressure between 15 and 100 psi (1-7 bar). Lower pressure may affect the spray performance.
Can I use it with any standard shower hose?
Yes, the connection is a standard 1/2 inch threaded fitting, compatible with most shower hoses and arms.
How do I clean the shower head?
Wipe the exterior with a soft damp cloth and a mild liquid soap. Rinse thoroughly and dry. Do not use abrasive or chemical cleaners.
How can I remove limescale from the nozzles?
Soak the shower head in a diluted vinegar solution (1 part vinegar to 3 parts water) for about 30 minutes, then rinse and massage the nozzles to release debris.
Does it have multiple spray settings?
Yes, there are 3 spray modes: rain, massage, and mist. Switch between them using the adjustment ring on the side.
Is the shower head suitable for low-pressure systems?
It is designed to perform with most home plumbing, but for very low pressure, avoid the massage mode. The rain mode usually works best.
What should I do if the water flow becomes uneven?
Remove the shower head and clean the inlet filter and nozzles, as limescale or debris may be blocking the flow.
Can I replace the O-rings?
Yes, the shower head includes a silicone washer that can be replaced if worn. Spare O-rings are available from ThermaSol.
What warranty does it come with?
The ThermaSol SLSRRD-AB comes with a 2-year limited warranty covering manufacturing defects.
User questions about SLSRRD-AB ThermaSol
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Shower head in PDF format for free! Find your manual SLSRRD-AB - ThermaSol and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SLSRRD-AB by ThermaSol.
USER MANUAL SLSRRD-AB ThermaSol
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ThermaSol
Model : SLSRRD-AB
Category : Shower head