GDS 7N2B-S - Tumble dryer CANDY - Free user manual and instructions
Find the device manual for free GDS 7N2B-S CANDY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Condenser tumble dryer |
| Brand | Candy |
| Model Reference | GDS 7N2B-S |
| Installation Type | Freestanding |
| Drying Capacity | 7 kg |
| Energy Class | B |
| Drying System | Condenser with auto drying |
| Number of Programs | 15 |
| Display Type | LED digital display |
| Control Options | Electronic dial and touch buttons |
| Height | 85 cm |
| Width | 60 cm |
| Depth | 60 cm |
| Weight | Approximately 40 kg |
| Power Supply | 220-240 V, 50 Hz |
| Rated Power | 2500 W |
| Noise Level | 69 dB |
| Drum Volume | 118 liters |
| Key Features | Sensor drying, anti-crease, delay timer, child lock |
| Maintenance Requirements | Clean lint filter after each use; empty water container after each cycle; clean condenser periodically |
| Safety Features | Overheat protection, door switch, anti-fluff filter |
| Repairability | Spare parts available; user-replaceable lint filter and condenser |
| Documentation | User manual included; free download available online |
Frequently Asked Questions - GDS 7N2B-S CANDY
How do I clean the lint filter on the Candy GDS 7N2B-S?
Open the door and pull the lint filter out from the bottom of the door opening. Remove the fluff with a soft brush or your hands, then rinse it under running water and dry it thoroughly before placing it back. Clean the filter after every drying cycle to maintain performance.
Where is the water collection container and how do I empty it?
The water container is located behind the bottom panel. Pull out the container, empty the water into a sink, and replace it. Ensure it is inserted correctly to avoid leaks. If you use the direct drain hose, you may not need to empty the container regularly.
What are the commonly used drying programs on this model?
The Candy GDS 7N2B-S offers programs such as Cotton for everyday laundry, Synthetics for mixed fabrics, Iron Dry for slightly damp items, Cupboard Dry for fully dry clothes, and Rapid or Quick Dry for small loads. Refer to the manual for the full list and compatibility.
How should I install the dryer safely?
Place the dryer on a flat and stable surface, leaving at least 10 cm clearance on all sides for ventilation. Do not block the air inlet or outlet. Use a standard earthed socket matching the voltage (220-240 V). For built-in installation, ensure proper air circulation and check the manual for specific venting requirements.
What is the energy consumption per cycle?
The consumption depends on the program and load. On the standard Cotton Cupboard Dry program, a full 7 kg load uses approximately 4.2 kWh. The energy class is B, meaning it is moderately efficient. Use sensor drying modes to reduce energy use.
Can I open the door during a drying cycle?
Yes, you can pause the cycle by pressing the Start/Pause button or simply opening the door. The drum will stop automatically for safety. Close the door and press start to resume. Note that opening the door stops the heat, so the drying time may increase slightly.
Why does the dryer stop before the laundry is completely dry?
Possible causes include overloading, a full water tank, a blocked lint filter, or dirty condenser. Check these components first. Also, particularly heavy items like towels may require a higher dryness level or a longer program selection.
How do I reset the dryer if an error message appears?
Turn the program dial to Off and unplug the dryer for about 1 minute. Plug it back in and select the desired program. If the error persists, check for blocked vents or full water tank. For persistent errors, contact customer service and quote the error code shown on the display.
Is this dryer safe for all fabrics?
No. Always check the care label on your garments. The dryer has programs for cotton, synthetics, and wool (with a dedicated low-heat setting). Do not dry items with rubber foam, certain plastics, or items treated with flammable chemicals. Use the Gentle or Low Heat option for delicate textiles.
How often should I clean the condenser and how?
Clean the condenser about every 30 drying cycles or at least once a month with regular use. Open the bottom flap, unlock and pull out the condenser unit, rinse it under running water with the fins vertical to avoid damage, shake off water, and refit securely. A clean condenser ensures efficient drying and lower energy consumption.
User questions about GDS 7N2B-S CANDY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble dryer in PDF format for free! Find your manual GDS 7N2B-S - CANDY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GDS 7N2B-S by CANDY.