TCH74B01FZ - Range hood AEG - Free user manual and instructions
Find the device manual for free TCH74B01FZ AEG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Chimney cooker hood |
| Colour | Stainless steel |
| Width | 74 cm |
| Depth | 50 cm |
| Height | Adjustable 55-110 cm |
| Max extraction rate | 520 m³/h |
| Number of speeds | 3 + intensive |
| Control type | Electronic push buttons |
| Lighting | 2 x 2 W LED |
| Grease filter | Aluminium mesh, washable |
| Air outlet diameter | 150 mm |
| Motor type | Single motor |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Installed power | 220 W |
| Noise level | 47 - 67 dB |
| Energy efficiency class | B |
| Annual energy consumption | 65 kWh/annum |
| Fluid dynamic efficiency class | D |
| Lighting efficiency class | A |
| Grease filtering efficiency class | C |
| Safety device | Thermal cut-out |
| Maintenance | Monthly filter cleaning; inspect regularly |
| Installation modes | Ducted or recirculating (charcoal filter optional) |
Frequently Asked Questions - TCH74B01FZ AEG
What is the installation height above the cooktop?
For best performance, install the hood at a minimum height of 65 cm above an electric hob and 75 cm above a gas hob. This ensures efficient capture of fumes and safe operation.
How do I clean the grease filter?
The aluminium grease filter should be cleaned every month. Remove it from the hood, wash it in warm soapy water or in the dishwasher at a low temperature, then dry completely before reinserting.
Can the hood be used in recirculation mode?
Yes, the hood can be used in recirculation mode by adding an activated charcoal filter (not supplied). This filter absorbs odors and should be replaced every 3-6 months depending on usage.
How do I replace the LED lamp?
The LED lamps are integrated and must be replaced by a qualified technician if they fail. Contact AEG customer service to order the correct replacement part and arrange installation.
Why is the hood not extracting properly?
Check that the grease filter is clean and not blocked. Also ensure the air outlet duct is not obstructed and the chimney flaps open correctly. The selected speed may be too low; increase the speed or use intensive mode for heavy steam.
How do I reset the saturation indicator?
After cleaning or replacing the grease filter, press and hold the light button for about 5 seconds until the indicator goes off. The exact reset procedure is detailed in the user manual.
What type of ducting is recommended?
Use a rigid or semi-rigid duct with a diameter of 150 mm, made of metal or heat-resistant material, to reduce airflow resistance and noise. Flexible ducts should be kept as short as possible and stretched taut.
Can I control the hood remotely?
The standard model is operated using the push buttons on the front panel. It does not support Wi-Fi or remote control unless stated in the model specifications. With this model, only manual operation is available.
How do I order spare parts or accessories?
Visit the AEG official website or contact authorised service centres. Use the model number TCH74B01FZ to find compatible grease filters, charcoal filters, lamps and other parts.
Is the hood suitable for island installation?
Yes, this chimney hood can be installed above an island if the ceiling allows proper ducting. An optional decorative chimney extension may be required depending on ceiling height. Ensure the structure can support the hood's weight.
User questions about TCH74B01FZ AEG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual TCH74B01FZ - AEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TCH74B01FZ by AEG.