Designer Series B-872 - Soap dispenser Bobrick - Free user manual and instructions
Find the device manual for free Designer Series B-872 Bobrick in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Surface-Mounted Soap Dispenser |
| Brand | Bobrick |
| Model | Designer Series B-872 |
| Series | Designer Series |
| Mounting Type | Wall-mounted |
| Material | Type 304 stainless steel |
| Finish | Satin stainless steel |
| Soap Type | Liquid soap |
| Reservoir Capacity | 40 fl oz (1.18 L) |
| Dispensing Mechanism | Push-button valve |
| Flow Adjustment | Adjustable flow rate |
| Dimensions (H x W x D) | 8.3 x 6.1 x 4.1 in (211 x 155 x 104 mm) |
| Weight | 1.8 lb (0.8 kg) |
| Included Components | Mounting screws, installation template, operating instructions |
| Corrosion Resistance | High-grade stainless steel for durability |
| Vandal Resistance | Heavy-duty construction with tamper-resistant screws |
| Intended Use | Commercial restrooms, high-traffic facilities |
| Maintenance | Wipe clean with mild detergent and water |
Frequently Asked Questions - Designer Series B-872 Bobrick
How do I install the B-872 soap dispenser?
Mount the dispenser at the desired height using the included mounting template. Mark the holes, drill pilot holes, and secure the backplate with the provided screws. Then hang the dispenser body and secure it with the tamper-resistant screw.
What type of soap is recommended?
Use standard liquid hand soap. Avoid using lotions with high viscosity or abrasive soap, as they may clog the push-button valve. The dispenser is designed for commercial-grade liquid soaps.
How do I refill the soap reservoir?
To refill, remove the reservoir by lifting it upward and pulling it away from the backplate. Fill with liquid soap up to the indicated maximum fill line, then reinstall by sliding it back onto the backplate until it locks.
How do I clean the dispenser?
Wipe the exterior with a soft, damp cloth and a mild detergent. Do not use abrasive cleaners or solvents, as they can damage the stainless steel finish. For the valve, disassemble and rinse with warm water periodically.
Can I adjust the amount of soap dispensed?
Yes, the B-872 features an adjustable flow regulator located under the valve. Turn the screw clockwise to reduce soap output or counterclockwise to increase it. Test after adjustment.
Is the dispenser suitable for high-traffic restrooms?
Yes, the heavy-duty stainless steel construction and vandal-resistant design make it ideal for commercial restrooms, schools, and public facilities.
What are the dimensions of the dispenser?
The B-872 measures 8.3 x 6.1 x 4.1 inches (211 x 155 x 104 mm). This compact size fits comfortably in most restroom layouts.
Does the dispenser come with a warranty?
Bobrick provides a one-year limited warranty against defects in materials and workmanship. Keep your receipt and contact Bobrick customer service for warranty claims.
Are replacement parts available?
Yes, replacement parts such as the valve assembly, gaskets, and reservoir are available from Bobrick or authorized distributors. Consult the manual for part numbers.
What should I do if the dispenser leaks or clogs?
If clogged, remove the valve and soak it in warm soapy water. Clean any debris and reinstall. If leaking, inspect the gaskets and replace them if worn. Ensure the reservoir is seated correctly.
User questions about Designer Series B-872 Bobrick
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Soap dispenser in PDF format for free! Find your manual Designer Series B-872 - Bobrick and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Designer Series B-872 by Bobrick.