CB-ISA225-U3 - Computer Cable Vantec - Free user manual and instructions
Find the device manual for free CB-ISA225-U3 Vantec in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | USB 3.0 to 2.5-inch SATA/IDE adapter cable |
| Brand | Vantec |
| Model | CB-ISA225-U3 |
| Host Interface | USB 3.0 with USB Type-A connector |
| Drive Interface | Compatible with 2.5-inch SATA and IDE (PATA) drives |
| Data Transfer Rate | Up to 5 Gbps in USB 3.0 mode |
| Power Source | USB bus power; additional USB power cable for IDE drives |
| Connectors | 22-pin SATA, 44-pin IDE, USB Type-A |
| LED Indicator | Power and activity LED |
| Cable Length | Approximately 30 cm |
| Dimensions | Compact adapter design (approx. 6.5 x 3.5 x 1.5 cm) |
| Weight | Approximately 120 g |
| Operating System Support | Windows, macOS, Linux |
| Plug & Play | Hot-swappable, no external power supply required for most 2.5-inch drives |
| Applications | Data recovery, drive cloning, backup, or accessing data from an old laptop drive |
| Package Contents | Adapter cable, additional USB power cable, user manual |
Frequently Asked Questions - CB-ISA225-U3 Vantec
What types of hard drives are compatible with the Vantec CB-ISA225-U3?
The adapter supports **2.5-inch SATA** and **2.5-inch IDE (PATA)** hard drives and SSDs. It is not designed for 3.5-inch drives.
Does this adapter require an external power supply?
For most 2.5-inch drives, the adapter draws power exclusively from the USB port. For 2.5-inch IDE drives, an additional USB power cable is included to ensure stable power delivery.
How do I connect a 2.5-inch IDE drive?
Align the 44-pin IDE connector on the adapter with the drive's pins, then attach the optional USB power cable for extra power. The included cable combines data and power in one connector, simplifying the connection.
What data transfer speeds can I expect?
With USB 3.0, you can achieve theoretical speeds up to **5 Gbps**. Real-world speeds depend on the connected drive and system, typically between **100-400 MB/s** for SSDs and lower for mechanical drives.
Can I use this adapter with 3.5-inch desktop drives?
No, the CB-ISA225-U3 is specifically designed for **2.5-inch drives**. Using it with a 3.5-inch drive is not recommended due to connector and power differences. Consider a powered adapter for 3.5-inch drives.
Is this adapter compatible with USB 2.0 ports?
Yes, it is backward compatible with **USB 2.0** and **USB 1.1**, but data transfer speeds will be limited to the port's maximum (480 Mbps for USB 2.0).
How do I connect a SATA drive?
Simply plug the **22-pin SATA connector** into the drive's SATA port. The adapter's integrated USB cable plugs into your computer. No additional power cable is needed for standard 2.5-inch SATA drives.
Does it support UASP (USB Attached SCSI Protocol)?
Yes, when connected to a system that supports UASP, the adapter can provide improved performance. UASP requires a USB 3.0 port and compatible motherboard/operating system.
What operating systems are supported?
The adapter works with **Windows** (7/8/10/11), **macOS** (10.x+), and most **Linux** distributions without extra drivers. For older systems, a driver may be required.
What should I do if my drive is not detected?
Check the cable connections, ensure the drive spins up (listen for clicks), and try a different USB port. For IDE drives, ensure the additional USB power cable is connected. If the drive appears as a new device but no partition is visible, initialize/format it using disk management tools.
User questions about CB-ISA225-U3 Vantec
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Computer Cable in PDF format for free! Find your manual CB-ISA225-U3 - Vantec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CB-ISA225-U3 by Vantec.