TS108 TrueSonic - Loudspeaker ALTO - Free user manual and instructions
Find the device manual for free TS108 TrueSonic ALTO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Active PA loudspeaker |
| Brand | Alto |
| Model | TS108 TrueSonic |
| Speaker type | 2-way bi-amplified |
| Woofer | 8" high-excursion driver |
| Tweeter | 1" high-frequency driver |
| Amplifier | Class D |
| Power (RMS) | 400 W |
| Peak power | 800 W |
| Frequency range | 60 Hz – 20 kHz |
| Maximum SPL | 116 dB @ 1 m |
| Inputs | 2 x XLR/TRS combo jacks |
| Output | 1 x XLR link |
| Controls | Volume, EQ, Bass/Treble |
| Enclosure material | Polypropylene |
| Mounting | Pole mount socket and floor wedge |
| Dimensions (H x W x D) | 16.9 x 11.2 x 10.0 in (430 x 285 x 254 mm) |
| Weight | 17.2 lbs (7.8 kg) |
| Power supply | AC 100-240 V, 50/60 Hz |
| Maintenance & cleaning | Wipe with dry cloth; avoid water and solvents |
| Safety | Read manual; keep away from moisture and direct sunlight |
| Spare parts & repairability | Contact authorized service center for genuine parts |
| General information | Designed for live sound, DJ, and installed audio applications |
Frequently Asked Questions - TS108 TrueSonic ALTO
How do I connect the TS108 TrueSonic to a mixer?
Connect a balanced XLR or 1/4" TRS cable from the mixer's main output to one of the line inputs on the speaker. Ensure the volume is turned down before making connections.
Can I use the TS108 as a floor monitor?
Yes, the wedge shape allows the speaker to be angled upward for use as a stage monitor. Place it on the floor with the handle side down and adjust the angle to aim at the performer.
How do I mount the speaker on a stand?
Insert the fixed pole of a PA speaker stand into the pole mount socket on the bottom of the TS108. Ensure the stand is on stable ground and does not exceed the safe height.
What is the maximum sound pressure level?
The maximum SPL is 116 dB at 1 meter, which is suitable for small to medium events and DJ setups.
How can I avoid feedback when using the speaker?
Position the speaker in front of microphones, keep the volume level moderate, and use EQ settings to reduce frequencies that tend to ring. Also, enhance the distance between the speaker and the microphone.
Can I connect two TS108 speakers together?
Yes, use the XLR link output on the first speaker to connect to the input of a second speaker. This allows you to daisy-chain multiple speakers without using extra mixer outputs.
How do I clean the TS108 loudspeaker?
Clean the enclosure with a dry soft cloth. Do not use water, alcohol, or abrasive cleaners that could damage the finish or the drivers.
What is the power requirement for this speaker?
The speaker has a built-in amplifier and works with a standard AC power supply of 100-240 V, 50/60 Hz. Always check the voltage label before connecting to power.
Is there a warranty for this product?
Alto typically offers a limited warranty for their speakers. Check the user manual or contact the dealer for specific warranty terms and conditions.
What should I do if the speaker does not produce sound?
First, ensure the power switch is on and the LED indicator is lit. Then check the audio cables and the mixer output. If the problem persists, test with another cable and consult the troubleshooting section of the manual.
User questions about TS108 TrueSonic ALTO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual TS108 TrueSonic - ALTO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TS108 TrueSonic by ALTO.
USER MANUAL TS108 TrueSonic ALTO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ALTO
Model : TS108 TrueSonic
Category : Loudspeaker