Kramer

AW-6D - Loudspeaker Kramer - Free user manual and instructions

Find the device manual for free AW-6D Kramer in PDF.

📄 6 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Kramer AW-6D - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Indoor/Outdoor Loudspeaker
Brand Kramer
Model AW-6D
Speaker Type Two-way passive
Low-Frequency Driver 6.5-inch woofer with weather-resistant cone
High-Frequency Driver 1-inch silk dome tweeter
Frequency Response 50 Hz – 20 kHz
Impedance 8 ohms
Power Handling 60 W RMS / 120 W peak
Sensitivity 90 dB @ 1 W / 1 m
Input Terminals Heavy-duty spring-loaded terminals
Mounting Wall-mount bracket with swivel and tilt adjustment
Enclosure Material Injection-molded polypropylene with metal grille
Weather Rating IP65 weather-resistant for outdoor use
Operating Temperature -20 °C to +50 °C
Dimensions (W x H x D) 210 x 340 x 190 mm
Weight 3.1 kg
Recommended Amplifier Power 20 – 100 W RMS per channel
Color Black or white (paintable grille)
Manufacturer Warranty Limited warranty

Frequently Asked Questions - AW-6D Kramer

How do I connect the AW-6D to my amplifier?
Connect the spring-loaded terminals from your amplifier or receiver to the matching terminals on the speaker, ensuring correct polarity for optimum sound.
Can I use the AW-6D outdoors?
Yes, the AW-6D has an IP65 weather rating, making it resistant to dust, rain, and condensation for reliable outdoor performance.
What is the recommended mounting height for these speakers?
Mount the speakers approximately 2–3 meters (6–10 feet) above the listening area, angled slightly downward for optimal coverage.
How should I clean and maintain the AW-6D?
Use a soft, dry cloth to wipe the exterior and grille. Do not use water or solvent-based cleaners, as they may damage the weather-resistant coating.
Can I paint the speaker grille to match my decor?
Yes, the grille is paintable. Use a high-quality spray paint and light coats to preserve acoustic performance.
What type of speaker wire should I use?
Use 16- to 14-gauge two-conductor speaker wire for runs up to 30 meters (100 feet) to maintain low resistance and avoid signal loss.
Can the AW-6D be used in a 70V commercial audio system?
No, the AW-6D is designed for standard 8-ohm operation. It does not include a 70V transformer, so it should be used with traditional amplifiers or receivers.
How many AW-6D speakers can I connect to one amplifier channel?
With an 8-ohm impedance, you can connect two 8-ohm speakers in parallel to a single channel rated for 4-ohm loads. Check your amplifier's rating before adding multiple speakers.
Is the wall-mount bracket included with the AW-6D?
Yes, a heavy-duty wall-mount bracket with swivel and tilt adjustments is included, simplifying installation on walls, ceilings, or poles.
What replacement parts are available for the AW-6D?
For replacement grilles, drivers, or brackets, contact Kramer customer support or an authorized dealer. Many parts are field-replaceable to extend the product's lifespan.

User questions about AW-6D Kramer

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Loudspeaker in PDF format for free! Find your manual AW-6D - Kramer and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AW-6D by Kramer.

USER MANUAL AW-6D Kramer

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Kramer

Model : AW-6D

Category : Loudspeaker