CAR12TC - Receiver JENSEN - Free user manual and instructions
Find the device manual for free CAR12TC JENSEN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Car Stereo Receiver |
| Brand | Jensen |
| Model | CAR12TC |
| Chassis Size | Single-DIN (2" x 7") |
| Dimensions (W x H x D) | 178 x 50 x 160 mm |
| Net Weight | 1.4 kg |
| Power Supply | 12 V DC (negative ground) |
| Max Power Output | 50 W x 4 channels |
| Radio Tuner | AM/FM with 30 presets |
| Audio Playback | CD, USB, AUX-IN |
| Connectivity | Bluetooth for hands-free calling and audio streaming |
| Remote Control | IR remote included |
| Display | LCD with multi-color illumination |
| Mounting | ISO/DIN chassis with trim ring |
| Maintenance | Wipe with soft dry cloth; avoid solvents |
| Safety | Fused power lead; correct polarity required |
| Spare Parts | Available via authorized Jensen service centers |
| Warranty | 1-year limited warranty |
| Country of Origin | China |
Frequently Asked Questions - CAR12TC JENSEN
How do I set the clock on the Jensen CAR12TC?
Press and hold the DISP button until the hour digits flash. Use the VOL knob to adjust hours, then press DISP again to switch to minutes. Rotate the knob to set minutes and press DISP to confirm.
How do I pair my phone via Bluetooth?
Enable Bluetooth on your phone and search for devices. Select JENSEN CAR12TC from the list. If prompted, enter the PIN 0000. Once paired, the unit will automatically reconnect when in range.
What should I do if the receiver does not power on?
First check the chassis fuse and the vehicle's ignition fuse. Verify that the yellow (memory) and red (accessory) wires have proper 12V supply and the black wire is grounded. Also confirm the unit is inserted fully into the ISO chassis.
Can I connect an external amplifier to this receiver?
Yes, the CAR12TC is equipped with preamp outputs (front and rear). Use shielded RCA cables to connect to your amplifier. You can adjust the output level via the audio menu.
How do I adjust bass and treble settings?
Press the MENU button and navigate to EQ or Sound settings. Use the VOL knob to select bass, treble, balance, and fader. Turn the knob to adjust each value and press to save.
Is the front panel detachable for theft prevention?
Yes, the Jensen CAR12TC features a detachable faceplate. Press the REL button to release the panel, then pull it out. Store it in the included protective case when not in use.
How do I reset the receiver to factory defaults?
Turn off the unit and press the RESET button located behind the faceplate using a pointed object. This clears all settings, including paired Bluetooth devices and saved radio stations.
What are the wiring color codes for installation?
Standard harness colors: Yellow - battery constant 12V, Red - ignition 12V, Black - ground, Blue - power antenna, Blue/White - amplifier remote. Speaker wires are typically white (front left), gray (front right), green (rear left), purple (rear right), each with a matching stripe for negative.
Can I play music from a USB drive?
Yes, the USB port supports MP3, WMA, and WAV files. Connect a USB drive (FAT32 format) and press SRC to select USB mode. Use the VOL knob to browse tracks and folders.
How should I clean and maintain the receiver?
Use a soft dry cloth to wipe the faceplate and display. Avoid using solvents or abrasive cleaners. Regularly check and clean the cooling vents to prevent overheating, and ensure the detachable faceplate contacts remain clean by gently rubbing them with a pencil eraser.
User questions about CAR12TC JENSEN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual CAR12TC - JENSEN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CAR12TC by JENSEN.