EMS-EM-3P-10K01 - Uncategorized Vivax - Free user manual and instructions
Find the device manual for free EMS-EM-3P-10K01 Vivax in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Three-phase electrical energy meter |
| Brand | Vivax |
| Model | EMS-EM-3P-10K01 |
| Rated Voltage | 3 × 230/400 V AC |
| Frequency | 50/60 Hz |
| Maximum Current | 100 A |
| Installation | DIN rail (35 mm) |
| Display | Digital LCD |
| Communication | RS485 Modbus |
| Accuracy Class | 1 |
| Measurements | Active and reactive energy, power, current, voltage, power factor |
| Power Supply | Self-powered via voltage inputs |
| Dimensions (H × W × D) | 72 × 90 × 65 mm |
| Weight | 250 g |
| Operating Temperature | -25 °C to +55 °C |
| Protection | IP20 |
| Standards | IEC 62053-21 |
| Maintenance | Wipe with dry cloth; do not use solvents |
| Safety | Qualified electrician must perform installation |
| Spare Parts & Repair | No user-serviceable parts; contact Vivax support |
Frequently Asked Questions - EMS-EM-3P-10K01 Vivax
How do I install the EMS-EM-3P-10K01 energy meter?
Installation must be done by a qualified electrician. The meter is mounted on a 35 mm DIN rail. Connect the three-phase wires according to the wiring diagram in the manual. Ensure the power is disconnected before installation.
What is the accuracy class of this meter?
The meter meets accuracy class 1 according to IEC 62053-21, suitable for sub-billing and monitoring applications.
How can I read the energy consumption from the LCD display?
The display cycles through different parameters such as total active energy, reactive energy, current, voltage and power. Use the button on the front to switch between screens.
Does this meter support Modbus communication?
Yes, it features an RS485 interface using the Modbus protocol for remote readout and integration with energy management systems.
What is the maximum current that can be measured?
The rated maximum current is 100 A. For higher currents, the meter can be used with external current transformers.
How do I maintain and clean the energy meter?
The meter is maintenance-free. To clean, simply wipe the housing with a dry cloth. Do not use any solvents or abrasive cleaners.
Can I use this meter in a solar photovoltaic installation?
Yes, it can be used to monitor net consumption and generation when connected to a suitable solar inverter system. However, consult the manual for bidirectional metering options.
How do I reset the stored energy values?
The energy counters are factory-set and should not be reset in normal operation. If you need to clear data, follow the reset procedure described in the user manual using the front button.
What is the power supply requirement for the meter?
The meter is self-powered from the voltage inputs, so no separate auxiliary supply is needed. The voltage range is 3 × 230/400 V AC.
Where can I find the full user manual for the Vivax EMS-EM-3P-10K01?
The complete manual is available as a free PDF download on notice-facile.com. Use the download button on this page to get the manual in English.
User questions about EMS-EM-3P-10K01 Vivax
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual EMS-EM-3P-10K01 - Vivax and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EMS-EM-3P-10K01 by Vivax.
USER MANUAL EMS-EM-3P-10K01 Vivax
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vivax
Model : EMS-EM-3P-10K01
Category : Uncategorized