VIS-LG - Tripod Ruggard - Free user manual and instructions

Product Type	Tripod
Brand	Ruggard
Model	VIS-LG
Maximum Height	170 cm
Minimum Height	60 cm
Folded Length	75 cm
Maximum Load Capacity	8 kg
Weight	2.5 kg
Head Type	Fluid head
Leg Sections	3
Leg Material	Aluminum
Leg Lock Type	Flip locks
Bubble Level	Yes
Quick Release Plate	Yes, with 1/4 inch screw
Compatibility	Camcorders, DSLR and mirrorless cameras
Power Source	Manual operation, no power required
Main Functions	Stable support, smooth pan and tilt movements
Maintenance and Cleaning	Wipe with a dry cloth; periodically check and tighten screws; lubricate moving parts
Safety	Do not exceed maximum load; ensure legs are fully locked
Spare Parts and Repairability	Replacement rubber feet and quick release plates available
General Information	Suitable for indoor and outdoor use

Frequently Asked Questions - VIS-LG Ruggard

What is the maximum load capacity of the Ruggard VIS-LG tripod?

The maximum load capacity is 8 kg, making it suitable for most camcorders and DSLR camera setups with heavy lenses.

How do I set up the tripod?

To set up, spread the legs evenly, adjust the height using the flip locks, and ensure all locks are tightly closed before mounting your device.

Can I use a DSLR camera with this tripod?

Yes, the VIS-LG is compatible with DSLR, mirrorless cameras, and camcorders thanks to its standard 1/4-inch quick release plate.

What type of head does the VIS-LG feature?

The tripod features a fluid head, which provides smooth pan and tilt movements essential for video recording.

How do I clean and maintain the tripod?

Clean the tripod with a dry, soft cloth. Periodically check and tighten screws, and apply a small amount of lubricant to moving parts to ensure smooth operation.

Is the tripod suitable for outdoor use?

Yes, the aluminum construction and rubber feet make it stable and durable for outdoor photography and videography.

Are spare parts available for the VIS-LG?

Yes, common spare parts such as rubber feet and quick release plates are available from Ruggard or authorized dealers.

How do I adjust the leg height?

Each leg has three sections with flip locks. Unlock all sections, set the desired height, and lock them securely.

Does the tripod come with a carrying bag?

While not always included, many retailers offer the VIS-LG with a carrying case. Check the package contents for details.

What is the weight of the tripod?

The tripod weighs approximately 2.5 kg, balancing portability with stability.

USER MANUAL VIS-LG Ruggard

Thank you for choosing Ruggard.

The Ruggard Camera Saddle is an essential component for your video rig that allows versatility and stress-free shooting. This malleable saddle molds to your equipment and most support surfaces, allowing you to rest your camera on top, and place the saddle on the ground, on a rock, or in a car. The inside is filled with polyester beads and the outside is a waterproof canvas with industrial-strength stitching, making the saddle lightweight and durable. A padded shoulder strap provides long hours of comfortable wear as you shoot video with your camera resting on the saddle or with the saddle under your arm for support. Carry the saddle with you as an alternative to using and carrying a tripod all day.

Warning! Using the Camera Saddle with a car or moving support is at the risk of the operator. Not safely securing the saddle and your camera properly may result in property damage or serious injury to you or others.

1. Tiedown loops
2. Shoulder strap
3. Polyester bead compartment
   Note: Use caution when opening the polyester bead compartment as the beads are prone to spilling out.
4. Storage pocket

5. Waterproof canvas

6. Accessory pockets

7. Carrying strap
8. Quick strap (×2)
9. Stirup(×4)
10. Anchor strap (×4)
11. Rope
12. Zipper pull

The Ruggard Camera Saddle allows you to position your camera in a variety of ways with the saddle molding to the shape of your camera and support structures. Sling the saddle over your shoulder and neck, resting your camera on it to alleviate stress when recording on long video shoots. From this position, capture movement by simply twisting your body while holding the camera, and the saddle will help stabilize the shot. Place the saddle on the ground or on a rock instead of using a tripod. Secure the saddle to a static object like a ladder or tree with the tie-down loops and quick straps to achieve an alternate shooting angle.

Securing the Saddle to a Moving Support

Capture dynamic shots by securing the Camera Saddle to a moving support like a car, bike, or dolly. This diagram shows the four stirrups positioned at the corners of a car's hood and doors with alternative attachment points on the bumpers and wheel wells. It is advisable to use all four stirrups on the vehicle.

The 27 foot long rope is applied in an X-shaped configuration with the rope and stirrups when tying down the saddle and camera, as shown in the diagram.

Three knots are recommended: the Bowline knot at position 1, the Trucker's Hitch at position 2, position 3 is a pass through, and another Trucker's Hitch at position 4 as well as two tie-down knots.

Note: Use the saddle's shoulder strap for additional tie-down security with the camera.

The anchor straps are used as internal tie-off points inside of the car at fixed positions to secure the saddle with the rope or straps. Place the anchors in the cracks of the door with the sturdy plastic head on the outside and the thick webbing on the inside.

Inside Car Mount

Detachable Zipper Pull

The zipper is not attached by default to prevent the polyester bead compartment from being accidentally pulled open during use. Remove or add beads to increase or decrease the saddle's rigidity.

Specifications

Stirrup dimensions 4.3 × 3.4 in. (11 × 8.5 cm)

Stirrup thickness 0.15 in. (3.9 mm)

Anchor strap dimensions 9.8 × 1 in. (25 × 2.5 cm)

Quick strap dimensions 65 × 1 in. (165 × 2.5 cm)

Rope length 27 ft. (8.2 m)

Dimensions (H × W × D) 14 × 18 × 12 in. (35.6 × 45.7 × 30.5 cm)

Weight 3.2 lb. (1.5 kg)

ONE-YEAR LIMITED WARRANTY

This RUGGARD product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) years from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider's responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider's discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function.

This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with specific legal rights, and you may also have additional rights that vary from state to state.

To obtain warranty coverage, contact the Ruggard Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Ruggard along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.

For more information or to arrange service, visit www.ruggard.com or call Customer Service at 212-594-2353.

Product warranty provided by the Gradus Group.

www.gradusgroup.com

RUGGARD is a registered trademark of the Gradus Group.

© 2025 Gradus Group LLC. All Rights Reserved. GG1

www.ruggard.com

RUGGARD®

A Gradus Group Brand