CMK-01 - Wall mount ORION - Free user manual and instructions
Find the device manual for free CMK-01 ORION in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wall mount |
| Brand | Orion |
| Model | CMK-01 |
| Intended Use | Mounting LCD/LED/OLED TVs and monitors |
| Compatible VESA Standards | 100x100, 200x100, 200x200, 300x300, 400x400 mm |
| Maximum Weight Capacity | 50 kg (110 lb) |
| Distance from Wall | 18 to 25 mm (low profile) |
| Tilt | 0° to -12° (adjustable tilt) |
| Swivel | Not applicable (fixed) |
| Material | Heavy-duty steel with black finish |
| Product Dimensions | 410 x 210 x 18 mm |
| Product Weight | 1.6 kg |
| Wall Attachment Type | Screws and anchors for concrete, brick, and wood stud walls |
| Compatible Stud Spacing | 16" (406 mm) and 24" (610 mm) |
| Cable Management | Integrated cable routing with cable clips |
| Level | Integrated bubble level |
| Safety | Anti-fall safety locking and locking bolts |
| Maintenance | Wipe with a soft dry cloth; do not use solvents |
| Spare Parts | Replacement screws and anchors available via Orion customer service |
| Repairability | Non-disassemblable structure; contact Orion technical support if needed |
| Package Contents | Wall mount, mounting kit, installation instructions |
| Warranty | 2 years |
Frequently Asked Questions - CMK-01 ORION
What is the VESA compatibility of the Orion CMK-01?
The Orion CMK-01 supports VESA patterns from 100x100 mm up to 400x400 mm, including 200x100, 200x200, and 300x300 mm. This makes it compatible with most 22" to 65" TVs and monitors.
Can I mount a 55-inch TV with this wall mount?
Yes, a 55-inch TV typically fits, as long as it has a compatible VESA hole pattern and weighs less than 50 kg (110 lb). Check your TV's manual for VESA dimensions and weight.
What type of wall is suitable for installation?
The mount is designed for concrete, brick, and wood stud walls. Appropriate screws and anchors are included. Do not install on drywall alone or plaster without structural support.
How far from the wall will my TV sit?
The CMK-01 is a low-profile wall mount, keeping your TV at a distance of 18 to 25 mm from the wall. This creates a sleek, near-flat appearance.
Does the package include all necessary hardware?
Yes, the package includes the mount, screws, wall anchors, spacer washers, and an installation manual. You may need a screwdriver and drill for installation.
Can I tilt the TV for better viewing angle?
The mount offers adjustable tilt from 0° to -12°, allowing you to reduce glare and improve viewing comfort.
How do I adjust the tilt?
To adjust the tilt, slightly loosen the tilt adjustment screws on the top of the wall brackets, set the desired angle, then re-tighten the screws firmly.
Is the mount secure for safety?
Yes, the mount features anti-fall safety locks and locking bolts to prevent accidental lifting or shifting. Always ensure the TV is properly latched onto the wall plate.
How should I clean and maintain the wall mount?
Clean the mount with a soft dry cloth to remove dust. Do not use abrasive cleaners or solvents, as they may damage the finish. Periodically check and tighten screws to maintain stability.
What if I lose the mounting screws?
Replacement screws and anchors are available through Orion customer service. Don't use non-standard screws, as they may compromise safety.
User questions about CMK-01 ORION
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Wall mount in PDF format for free! Find your manual CMK-01 - ORION and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CMK-01 by ORION.
USER MANUAL CMK-01 ORION
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ORION
Model : CMK-01
Category : Wall mount