BCO-7000 - Can opener Vollrath - Free user manual and instructions
Find the device manual for free BCO-7000 Vollrath in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Vollrath |
| Model | BCO-7000 |
| Product Type | Manual Can Opener |
| Material | Stainless Steel and Cast Iron |
| Cutting Mechanism | Sharpened Steel Cutting Wheel |
| Mounting Type | Countertop or table mount with clamp |
| Dimensions | 12 x 5 x 10 inches (L x W x H) |
| Weight | 4 lbs (approximate) |
| Power Source | Manual (no electricity required) |
| Operation | Rotary handle with gear-driven drive |
| Capacity | Suitable for standard size cans up to 15 cm (6 inches) in diameter |
| Compatibility | Industrial/commercial kitchens |
| Cleaning | Wipe with damp cloth; do not immerse |
| Maintenance | Periodic lubrication of gears; replace cutting wheel when dull |
| Safety Features | Safety guard around blade, stable base clamp |
| Warranty | 1 year limited warranty |
| Country of Origin | USA |
| Included Accessories | Mounting screws, blade replacement key |
| Certifications | NSF, CE |
Frequently Asked Questions - BCO-7000 Vollrath
How do I mount the Vollrath BCO-7000 can opener?
Use the built-in clamp to secure it to a countertop or table edge. Adjust the clamp knob until tight. The base has pre-drilled holes for permanent mounting with screws.
Can the BCO-7000 open cans of any size?
This manual can opener is designed for standard commercial cans up to 6 inches in diameter and 7 inches tall. It is not intended for oversized or specialty containers.
How do I clean the can opener after use?
Wipe all exterior surfaces with a damp cloth. Remove food debris with a brush. Do not wash in a dishwasher or immerse in water, as this may damage the cutting mechanism.
Does the cutting blade need to be replaced?
Yes, over time the cutting wheel can dull. Replacement blades are available. Loosen the blade screw, detach the old wheel, and install a new one.
Is this can opener safe to use?
It includes a safety guard that covers the blade during operation. Always keep fingers away from the cutting area and use the handle smoothly.
How do I lubricate the can opener?
Apply a few drops of food-grade mineral oil to the gear mechanism and the cutting wheel axis every few months to maintain smooth operation.
Can the Vollrath BCO-7000 be used left-handed?
Yes, the rotating handle can be operated from either side, making it suitable for both left- and right-handed users.
What should I do if the can opener slips while cutting?
Check that the can is properly positioned with the piercing blade puncturing the lid. Ensure the clamp is tight and the can is not oversized or malformed.
Is the can opener dishwasher safe?
No. The gear mechanism and cutting wheel can be corroded by dishwasher detergents. Hand-wipe only.
What warranty does Vollrath provide for the BCO-7000?
Vollrath offers a 1-year limited warranty covering defects in materials and workmanship under normal use.
User questions about BCO-7000 Vollrath
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Can opener in PDF format for free! Find your manual BCO-7000 - Vollrath and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BCO-7000 by Vollrath.
USER MANUAL BCO-7000 Vollrath
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vollrath
Model : BCO-7000
Category : Can opener