27M2N5500MY - Monitor PHILIPS - Free user manual and instructions
Find the device manual for free 27M2N5500MY PHILIPS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Monitor |
| Brand | Philips |
| Model | 27M2N5500MY |
| Screen Size | 27 inches (68.6 cm) |
| Panel Type | IPS |
| Resolution | 2560 x 1440 pixels (QHD) |
| Refresh Rate | 165 Hz |
| Response Time | 1 ms (MPRT) |
| Brightness | 350 cd/m² |
| Contrast Ratio | 1000:1 |
| Viewing Angle | 178° / 178° |
| Aspect Ratio | 16:9 |
| Connectivity | 2x HDMI 2.0, 1x DisplayPort 1.4, 1x Audio out |
| Stand Adjustments | Tilt (-5° / +20°) |
| VESA Mounting | 100 x 100 mm |
| Power Supply | Internal, 100-240V AC |
| Power Consumption (typical) | 30 W |
| Standby Power | 0.5 W |
| Dimensions (with stand) | 613 x 515 x 199 mm |
| Weight (with stand) | 5.2 kg |
| Special Features | LowBlue mode, Flicker-free, Adaptive Sync |
| Maintenance | Clean with a soft dry cloth |
| Safety | Operate in a well-ventilated area |
| Spare Parts and Repair | Use Philips authorized service centers |
Frequently Asked Questions - 27M2N5500MY PHILIPS
How do I connect my Philips 27M2N5500MY to a PC?
Connect a HDMI or DisplayPort cable from your PC to the corresponding port on the monitor. Ensure the monitor is set to the correct input source using the OSD menu.
What is the optimal resolution for this monitor?
The native resolution is 2560 x 1440 pixels (QHD). For the sharpest image, set your computer's display output to this resolution.
Does this monitor support Adaptive Sync?
Yes, the Philips 27M2N5500MY supports Adaptive Sync (FreeSync) to reduce screen tearing when gaming. Enable it in the OSD menu under 'Game Settings'.
Why is the screen flickering?
Screen flicker can be caused by an incorrect refresh rate. Make sure your PC is set to 165 Hz, and check if Flicker-free mode is active in the OSD settings.
How do I adjust the brightness on this monitor?
Use the control buttons below the screen to open the OSD menu. Navigate to 'Picture' and then adjust the 'Brightness' slider to your preference.
Can I wall-mount this monitor?
Yes, it supports VESA 100 x 100 mm mounting. Use a compatible wall mount arm, and ensure the screws are tightened securely.
How should I clean the screen safely?
Turn off the monitor and unplug it. Wipe the screen gently with a soft microfiber cloth. Avoid using harsh chemicals or spraying liquid directly on the panel.
Does this monitor have built-in speakers?
No, the Philips 27M2N5500MY does not have built-in speakers. You can connect external speakers via the audio out port if needed.
How do I reset the monitor to factory settings?
Open the OSD menu with the control buttons, go to 'Setup' and select 'Reset'. Confirm with 'Yes' to restore all settings to the factory defaults.
What is the refresh rate of this monitor?
This display supports up to 165 Hz natively. For the best gaming experience, ensure your graphics card can output at that refresh rate and enable it in your display settings.
User questions about 27M2N5500MY PHILIPS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Monitor in PDF format for free! Find your manual 27M2N5500MY - PHILIPS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 27M2N5500MY by PHILIPS.
USER MANUAL 27M2N5500MY PHILIPS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PHILIPS
Model : 27M2N5500MY
Category : Monitor