PUV-1550STX - Uncategorized CYP - Free user manual and instructions
Find the device manual for free PUV-1550STX CYP in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | HDBaseT Transmitter / 5x1 HDMI Matrix Switcher |
| Input Ports | 5 x HDMI (Type-A female) |
| Output Ports | 1 x HDBaseT (RJ-45), 1 x IR Extender, 1 x RS-232 |
| Maximum Resolution | 4K UHD 60Hz (4:2:0), 1080p 60Hz full support |
| HDCP Support | HDCP 2.2 and HDCP 1.4 compliant |
| Power over Cable | POC supported for powered receivers |
| Transmission Distance | Up to 70m at 1080p, up to 40m at 4K via Cat5e/6 cable |
| Audio Formats | LPCM 7.1, Dolby Atmos, DTS:X, Dolby TrueHD, DTS-HD Master Audio |
| Control Interface | IR, RS-232, and TCP/IP for remote management |
| Power Supply | DC 24V, 2.7A (included) |
| Dimensions (W x D x H) | 430 x 160 x 44 mm (rack-mountable, 1U) |
| Weight | 1.2 kg |
| Operating Temperature | 0°C to 45°C |
| Storage Temperature | -20°C to 60°C |
| Rack Mount | Includes rack ears for 19-inch standard |
| LED Indicators | Power, input source selected, HDBaseT link status |
| Maintenance & Cleaning | Clean the exterior with a soft, dry cloth. Avoid household cleaners. |
| Safety | Do not expose to rain or moisture. Use only the provided power adapter. Ensure proper ventilation. |
| Spare Parts & Repairability | No user-serviceable parts. For repair, contact qualified service personnel or the dealer. |
| General Information | Supports auto-switching between inputs, EDID management, and seamless switching. |
Frequently Asked Questions - PUV-1550STX CYP
How do I connect the PUV-1550STX to my display?
Connect your HDMI sources to the five input ports and the display to a compatible HDBaseT receiver via a Cat5e/6 cable. Make sure the receiver is powered or uses Power over Cable (POC) if supported.
What HDMI cable length is recommended?
Use high-speed HDMI cables with Ethernet support for best performance. Keep input cables under 5 meters to avoid signal degradation.
Does the PUV-1550STX support 4K video?
Yes, it supports 4K UHD at 60Hz with 4:2:0 chroma sampling. For 4K 60Hz 4:4:4, ensure your receiver and cable also support full bandwidth.
How can I control the switcher remotely?
You can use IR remote, RS-232 commands, or TCP/IP over the network. Refer to the command protocol in the user manual.
What is the maximum distance between transmitter and receiver?
The unit can transmit signals up to 70 meters at 1080p and 40 meters at 4K UHD using a single Cat5e/6 cable.
Why do I not see any video on the display?
Check if the correct input is selected, verify that all HDMI cables are securely connected, and ensure that the HDBaseT link is active. Also confirm the display device is set to the correct source.
Can the device be mounted in a rack?
Yes, it comes with rack ears for standard 19-inch racks, and the 1U height makes it ideal for studio and professional installations.
Does the unit support audio return or separate audio outputs?
The switcher transmits embedded audio over the HDMI/HDBaseT link. There are no dedicated analog audio outputs on this model.
Is the PUV-1550STX HDCP compliant?
Yes, it is fully HDCP 2.2 compliant, allowing playback of protected content from streaming devices, Blu-ray players, and more.
What is the power requirement?
The transmitter requires a DC 24V power adapter, which is included in the package. It can also provide power to the receiver via POC if the receiver supports it.
User questions about PUV-1550STX CYP
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual PUV-1550STX - CYP and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PUV-1550STX by CYP.