PT-31E - Uncategorized Edimax - Free user manual and instructions
Find the device manual for free PT-31E Edimax in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Edimax |
| Model | PT-31E |
| Product Type | Wireless Pan/Tilt IP Camera |
| Image Sensor | 1/4" CMOS sensor |
| Video Resolution | 640 × 480 (VGA) at up to 30 fps |
| Video Compression | MJPEG |
| Lens | Fixed focus, built-in |
| Pan Range | 270° horizontal |
| Tilt Range | 90° vertical |
| Network Interface | 10/100 Mbps RJ-45 Ethernet port |
| Wireless Standard | IEEE 802.11b/g |
| Power Supply | 5V DC, 1A power adapter |
| Dimensions | 120 × 100 × 120 mm (approx.) |
| Weight | 250 g (approx.) |
| Operating Temperature | 0°C to 40°C |
| Security | WEP, WPA, WPA2 encryption; admin password protection |
| Maintenance & Cleaning | Wipe with a soft dry cloth; clean the lens with a brush |
| Spare Parts & Repairability | Power adapter and mounting kit available; contact Edimax support for repairs |
| General Information | Web-based management; DDNS support; compatible with Windows and Linux browsers |
Frequently Asked Questions - PT-31E Edimax
How do I connect the Edimax PT-31E to my router?
Plug the Ethernet cable into the camera and your router, then use the supplied installation CD to run the setup wizard. The wizard detects the camera, assigns an IP address, and lets you configure the wireless network.
Does the PT-31E support wireless connection?
Yes, the PT-31E includes an IEEE 802.11b/g Wi-Fi module for wireless connectivity. After initial Ethernet setup, you can configure the camera to join your wireless LAN.
How can I view the camera remotely?
Use the Edimax IPView software or open your Internet browser to access the camera's IP address. For remote viewing, set up DDNS and port forwarding on your router.
How do I reset the PT-31E to factory defaults?
Press and hold the Reset button on the side of the camera for about 10 seconds while the camera is powered on. The camera reboots and restores the factory default settings, including IP address and login credentials.
What image resolution does the PT-31E provide?
The PT-31E delivers VGA resolution (640×480 pixels) for live video, and supports lower resolutions for bandwidth-friendly monitoring. The frame rate typically reaches 30 fps.
How do I clean and maintain the camera?
Use a soft, dry cloth to wipe the housing and a lens brush to remove dust from the lens. Avoid water and harsh cleaning chemicals, and keep the ventilation openings clear.
What security features should I enable?
Always change the default administrator password, enable WPA2 encryption on the camera's wireless settings, and upgrade the firmware regularly to protect your video feed.
Can the PT-31E pan and tilt automatically?
Yes, you can control pan and tilt from the web interface or software. The camera can also be set to patrol between preset positions, giving you wide-angle coverage.
What power supply do I need for the PT-31E?
The camera is powered by the included 5V DC, 1A power adapter. Use an approved adapter only to avoid damage and maintain electrical safety.
Where can I find spare parts or repair support?
Spare parts such as the power adapter and mounting bracket are available through Edimax distributors. For internal repairs, contact Edimax technical support or an authorized service center.
User questions about PT-31E Edimax
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual PT-31E - Edimax and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PT-31E by Edimax.
USER MANUAL PT-31E Edimax
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Edimax
Model : PT-31E
Category : Uncategorized