9572 - Uncategorized MILWAUKEE - Free user manual and instructions
Find the device manual for free 9572 MILWAUKEE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Right Angle Drill |
| Brand | Milwaukee |
| Model | 9572 |
| Power Source | Corded electric |
| Voltage | 120 V AC |
| Amperage | 10.5 A |
| Frequency | 50/60 Hz |
| No-Load Speed | 0-550 RPM |
| Chuck Size | 1/2 inch (13 mm) |
| Chuck Type | Keyed, ratcheting |
| Handle Type | D-handle with paddle switch |
| Head Angle | Adjustable right angle head |
| Weight | 11.5 lb (5.2 kg) |
| Dimensions (L x H x W) | 17.5 x 5.5 x 5.5 in (44.5 x 14 x 14 cm) |
| Cord Length | 10 ft (3 m) |
| Gear Case | All-metal, hardened steel |
| Lock-On Switch | Smooth paddle with lock-on button |
| Serviceable Parts | Motor brushes and chuck replaceable |
| Motor Brushes | Accessible and replaceable |
| Compliance | UL and CSA listed |
| Included Accessories | Side handle, chuck key, carrying case |
| Intended Use | Drilling in confined spaces |
| Maintenance | Inspect brushes and clean vents |
Frequently Asked Questions - 9572 MILWAUKEE
What types of drill bits can I use with the Milwaukee 9572?
This drill accepts bits with a shank up to 1/2 inch (13 mm). The keyed chuck clamps firmly, making it suitable for high-torque drilling in wood, steel, and masonry.
How do I adjust the right angle head?
Loosen the locking collar on the head, rotate the head to the desired position (usually 90 degrees in different orientations), then tighten the collar securely. This feature lets you access tight spaces easily.
Can I vary the drilling speed?
Yes, the paddle trigger provides variable speed from 0 to 550 RPM. The harder you squeeze, the faster the drilling. A lock-on button lets you maintain a constant speed without holding the trigger.
How do I change the rotation direction?
Use the reverse lever located near the trigger. Slide it to the left or right to switch between forward and reverse rotation for drilling and removing fasteners.
How do I install a drill bit safely?
Unplug the drill, insert the chuck key into the holes on the chuck, rotate clockwise to open the jaws. Place the bit, then rotate counterclockwise to tighten. Always remove the chuck key before plugging in or starting.
When should I replace the motor brushes?
If you notice excessive sparking, reduced power, or erratic operation, replace the carbon brushes. The brush caps are located on the motor housing; unscrew them and slide out the brushes, then install new genuine Milwaukee brushes.
What regular maintenance does the Milwaukee 9572 require?
Keep the drill clean and dry, wipe off dust after use, and inspect the power cord for damage. Periodically clean the air vents to prevent overheating, and apply a few drops of oil to the chuck as needed.
Is it possible to drill into concrete with this tool?
Yes, use a carbide-tipped masonry bit and apply steady, moderate pressure. The right angle design allows you to drill into concrete in confined spaces, but for large holes consider a rotary hammer.
What safety equipment should I use?
Always wear safety glasses, hearing protection, and non-slip gloves. Make sure the workpiece is clamped, and never wear loose clothing or jewelry. Keep the work area well-lit and free of debris.
Is the drill double-insulated and does it need a grounded outlet?
The Milwaukee 9572 is grounded, not double-insulated. It must be connected to a three-hole grounded outlet. Never remove the grounding prong, as it protects against electric shock in case of internal damage.
User questions about 9572 MILWAUKEE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual 9572 - MILWAUKEE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 9572 by MILWAUKEE.
USER MANUAL 9572 MILWAUKEE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MILWAUKEE
Model : 9572
Category : Uncategorized