HDF8i10HB - Tumble dryer HISENSE - Free user manual and instructions
Find the device manual for free HDF8i10HB HISENSE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Heat Pump Condenser Tumble Dryer |
| Brand | Hisense |
| Model | HDF8i10HB |
| Capacity | 8 kg |
| Energy Efficiency Class | A++ |
| Dimensions (H x W x D) | 85 x 60 x 60 cm |
| Weight | 38 kg |
| Power Supply | 220-240 V, 50-60 Hz |
| Noise Level | 65 dB |
| Drying Programs | 15 programs, including Cotton, Synthetics, Delicates, Sports, Express |
| Reversible Door | Yes |
| Drum Material | Stainless steel |
| Control Type | LED display and touch controls |
| Delay Start | Up to 24 hours |
| Child Lock | Yes |
| Water Tank | 4.5 L |
| Lint Filter | Removable, easy to clean |
| Heat Exchanger | Self-cleaning |
| Moisture Sensor | Yes |
| Installation Type | Freestanding |
| Venting Type | Condenser (ventless) |
Frequently Asked Questions - HDF8i10HB HISENSE
How do I clean the lint filter?
Clean the lint filter after every drying cycle. Open the door and pull the filter out from the door opening. Remove the fluff with your fingers or a soft brush, rinse under warm water if needed, dry it, and reinsert it.
How do I empty the water tank?
The water tank collects condensed water. When the tank is full, a warning light appears. Remove the tank from the bottom right side, empty it into a sink, and put it back securely.
Why is drying taking longer than expected?
Possible causes include a clogged lint filter, an overfilled drum, or a too high start humidity. Also check that the selected program matches the fabric type and that the condenser is clean.
Can I install the dryer on top of a washing machine?
You can stack the dryer on a compatible washing machine using a stacking kit. Make sure the washing machine is sturdy and the kit is installed according to the instructions.
How does the delay start function work?
The delay start allows you to set the dryer to begin automatically after a certain time, up to 24 hours. Press the delay button repeatedly to set the hours, then start the cycle.
What does the child lock do?
The child lock disables the control panel to prevent accidental changes during drying. Press and hold the child lock button for a few seconds to activate or deactivate it.
Why is the dryer not heating?
If the dryer runs but does not heat, check that a blocked lint filter or condenser is not restricting airflow. Also verify the power supply and that the program is not a cold air setting. If the issue persists, contact support.
How do I choose the right drying program?
Select a program based on the fabric type and desired dryness level. Cotton programs are for sturdy fabrics, synthetics for man-made fibres, and delicates for sensitive items. The dryer will stop automatically when the target moisture is reached.
Can I dry sneakers in this dryer?
Yes, but use a specific sports shoes program if available, or a low-temperature delicates cycle. Place the shoes in the drum without laces, and remove them promptly after the cycle finishes.
How often should I clean the heat exchanger?
Clean the heat exchanger after about 30 cycles or monthly to maintain efficiency and reduce drying time. Open the lower cover, pull the exchanger out, rinse it with water, and wipe it clean.
User questions about HDF8i10HB HISENSE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble dryer in PDF format for free! Find your manual HDF8i10HB - HISENSE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HDF8i10HB by HISENSE.