W-736H - Wristwatch CASIO - Free user manual and instructions
Find the device manual for free W-736H CASIO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Wristwatch |
| Brand | Casio |
| Model | W-736H |
| Category | Watch |
| Display | Digital (LCD) |
| Movement | Quartz |
| Case material | Resin |
| Band material | Resin |
| Water resistance | 100 meters (10 ATM) |
| Battery type | CR2016 |
| Battery life | Approx. 10 years |
| Functions | Time, date, chronograph, alarm, hourly time signal |
| Chronograph | 1/100 second, 24-hour capacity |
| Alarms | 5 daily alarms |
| Backlight | LED light |
| Calendar | Auto-calendar up to 2039 |
| Dimensions | Approx. 45.0 × 40.0 × 10.5 mm |
| Weight | Approx. 40 g |
| Cleaning | Wipe with soft dry cloth |
| Maintenance | Avoid solvents and extreme temperatures |
| Security | Keep away from magnets and static electricity |
| Spare parts | Replacement straps and batteries available |
| Repairability | Professional battery replacement recommended |
| General info | Resin case and band for comfort and durability |
Frequently Asked Questions - W-736H CASIO
How do I set the time on my Casio W-736H?
Press the timekeeping mode button (top left) to enter the display. Hold the adjust button for about 3 seconds until the seconds digits flash. Use the light button to change the value and the mode button to switch between settings. After finishing, press the adjust button again to exit.
How to use the chronograph on the W-736H?
From the timekeeping mode, press the mode button until you reach the stopwatch mode. Press the start/stop button to start timing, press it again to stop. Press the reset button to reset the chronograph to zero. The chronograph measures up to 24 hours in 1/100-second increments.
How to change the battery in the W-736H?
The W-736H uses a CR2016 lithium battery. To replace it, remove the battery cover with a screwdriver (refer to the manual for the exact procedure). Keep the watch dry and avoid touching the new battery terminals. It is recommended to have the battery replaced by a qualified technician.
Is the W-736H waterproof?
The Casio W-736H has a water resistance of 100 meters (10 bar). This means it is suitable for swimming and light snorkeling, but not for scuba diving. Do not press buttons while underwater.
How to use the alarm function?
To set an alarm, go to the alarm mode by pressing the mode button. Press the adjust button to enter alarm setting. Use the light button and start/stop button to adjust the hour and minute. Press the adjust button to save. Activate the alarm by toggling the alarm on/off indicator in the alarm mode.
What does the backlight button do?
The light button (top right) activates the LED backlight, illuminating the display for a few seconds. This is useful in dark environments. The backlight is not fully waterproof, so avoid prolonged exposure to water.
How to set the alarm time and activate/deactivate it?
In the alarm mode, hold adjust until the hour digits flash. Use light and start/stop to set the time. Press adjust to confirm. Then press start/stop to switch the alarm between on and off. The indicator will show the status.
How to maintain and clean the watch?
Use a soft dry cloth to wipe the case and bracelet. Avoid using solvents, alcohol, or sharp objects. For a deeper clean, lightly moisten the cloth with water and soap, then dry immediately. Keep the watch away from extreme temperatures and direct sunlight for long periods.
Why does the watch display show weird characters or freeze?
If the display freezes or shows odd characters, it may be caused by static electricity or a low battery. Perform a reset by pressing the reset button located near the battery compartment, or remove and reinsert the battery. If the issue persists, replace the battery or consult a professional.
How to use the hourly time signal?
The hourly time signal (beep) is part of the alarm mode. In the alarm mode, press the start/stop button to cycle through the alarm and hourly time signal settings. When the time signal indicator is displayed, press start/stop again to turn it on or off. When enabled, a beep sounds each hour on the hour.
User questions about W-736H CASIO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Wristwatch in PDF format for free! Find your manual W-736H - CASIO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. W-736H by CASIO.
USER MANUAL W-736H CASIO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CASIO
Model : W-736H
Category : Wristwatch