Lumen eRIDE 905 - Bicycle SCOTT - Free user manual and instructions
Find the device manual for free Lumen eRIDE 905 SCOTT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric mountain bike |
| Brand | Scott |
| Model | Lumen eRIDE 905 |
| Category | E-bike |
| Motor Type | Bosch Performance CX mid-drive motor |
| Battery Capacity | 625 Wh lithium-ion |
| Charging Time | About 4.5 hours |
| Range | Up to 120 km (eco mode) |
| Frame Material | Carbon fiber |
| Wheel Size | 29 inches |
| Front Suspension | 120 mm travel fork |
| Brakes | Hydraulic disc brakes |
| Gearing | 12-speed derailleur |
| Max Speed | 25 km/h (EU standard) |
| Weight | Approximately 22 kg |
| Tire Type | Tubeless-ready, 2.4 inches |
| Display | Bosch Kiox with Bluetooth |
| Connectivity | eBike Flow app compatible |
| Maintenance | Regular chain lubrication and brake checks |
| Repairability | Replaceable components and battery |
Frequently Asked Questions - Lumen eRIDE 905 SCOTT
What is the maximum assisted speed of the Scott Lumen eRIDE 905?
The motor provides assistance up to 25 km/h, which is the standard limit for electric bikes in the EU. Above this speed, the motor stops assisting, but you can continue pedaling manually.
How long does the battery take to charge fully?
With the supplied 4A charger, the 625 Wh battery charges in approximately 4.5 hours from empty. Using a smaller charger may increase charging time.
How can I extend the bike's range on a ride?
To maximize range, use a lower assist mode like Eco, maintain a steady cadence, keep tires properly inflated, and reduce wind resistance by staying tucked. Also, minimize braking by anticipating stops.
What routine maintenance does this e-bike need?
Regularly inspect and lubricate the chain, check brake pads for wear, verify tire pressure, and ensure all bolts are tightened to the recommended torque. Have the motor and battery checked annually by a certified dealer.
Can I ride the Lumen eRIDE 905 without engaging the motor?
Yes, you can ride it as a traditional bicycle. The motor adds drag when off, so it's best to switch it off or use the lowest assist mode. The bike's gears and brakes work normally without power.
How do I update the firmware of the display and motor?
Use the eBike Flow app on your smartphone. Connect via Bluetooth, follow the app instructions to download and install updates. Make sure the battery has at least 30% charge during updates.
What is the maximum rider weight for the Scot Lumen eRIDE 905?
The frame and components are rated for a total weight of 120 kg (rider plus luggage). This complies with typical e-MTB standards. Exceeding this may compromise safety.
Is the battery removable for charging or replacement?
Yes, the 625 Wh battery is integrated into the down tube and can be removed with a key for secure charging or replacement. Charging can also be done while the battery is on the bike.
How should I clean the e-bike?
Use a soft sponge, mild soap, and water to clean the frame. Avoid high-pressure washers, as they can damage electrical components. Dry the bike and apply lubricant to the chain after cleaning.
What type of brakes are fitted on this model?
It is equipped with hydraulic disc brakes, which provide powerful and modulated stopping in all conditions. The 203 mm front and 180 mm rear rotors ensure reliable performance on descents.
User questions about Lumen eRIDE 905 SCOTT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Bicycle in PDF format for free! Find your manual Lumen eRIDE 905 - SCOTT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Lumen eRIDE 905 by SCOTT.
USER MANUAL Lumen eRIDE 905 SCOTT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SCOTT
Model : Lumen eRIDE 905
Category : Bicycle