FXNQ-P - Air Conditioning DAIKIN - Free user manual and instructions
Find the device manual for free FXNQ-P DAIKIN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Indoor unit for ceiling recessed cassette air conditioner |
| Model series | Daikin FXNQ-P |
| Installation type | Ceiling recessed, 4-way airflow |
| Cooling capacity (nominal) | 5.0 kW (depending on model variant) |
| Heating capacity (nominal) | 5.8 kW (depending on model variant) |
| Power supply | 220-240 V, 50/60 Hz, single phase |
| Dimensions (body) | 840 x 840 x 300 mm (W x D x H) |
| Dimensions (panel) | 950 x 950 x 60 mm (W x D x H) |
| Net weight (body) | 24 kg |
| Net weight (panel) | 4.5 kg |
| Airflow rate (high) | 720 m³/h |
| Noise level (indoor, low) | 31 dB(A) |
| Refrigerant | R32 (pre-charged) |
| Main functions | Cooling, heating, dehumidification, ventilation, auto changeover |
| Filter type | Washable pre-filter with deodorizing enzyme catalyst |
| Maintenance and cleaning | Clean or replace air filter every 2 weeks; drain pan cleanable |
| Safety features | Overheating protection, leakage circuit breaker, auto-diagnosis |
| Spare parts and repairability | Filters, remote control, printed circuit board, drain pump available |
| General information | CE marked, RoHS compliant, energy class A++ in cooling mode |
| Remote control | Wireless remote control included with LCD display |
| Warranty | 3 years on parts and compressor (standard) |
Frequently Asked Questions - FXNQ-P DAIKIN
How often should I clean the air filter?
It is recommended to clean the air filter every two weeks in normal use. More frequently if the unit is used in dusty environments.
Can the FXNQ-P be used for both cooling and heating?
Yes, the Daikin FXNQ-P is a heat pump system that provides both cooling and heating functions, with automatic changeover available.
What is the recommended installation height for the cassette unit?
The unit should be installed in a ceiling with sufficient clearance; the typical recommended distance from the floor to the unit bottom is 2.3 to 2.7 meters for optimal airflow.
How do I reset the unit after a power outage?
After a power outage, the unit may need to be restarted. Use the remote control to press the ON/OFF button, and the unit will resume operation.
What type of refrigerant does the FXNQ-P use?
The FXNQ-P uses R32 refrigerant, which is more environmentally friendly than older types but requires specific handling and installation procedures.
Can I operate the unit without the remote control?
There is a manual operation switch on the main unit that allows you to start the unit in emergency mode with basic settings, but full control requires the remote.
How do I troubleshoot the 'Err' display?
The error code can be found in the manual. Common causes include communication errors between indoor and outdoor units, or sensor issues. Contact a qualified technician if it persists.
What is the maximum distance between the indoor and outdoor units?
For the FXNQ-P, the maximum piping length is typically 30 to 50 meters depending on the system, and the vertical difference should not exceed 15 meters.
Does the unit have a dehumidification mode?
Yes, the FXNQ-P includes a dehumidification mode that reduces humidity while keeping the room temperature relatively stable.
Is the unit compatible with a smart control system?
The FXNQ-P can be connected to a parallel interface adapter for integration with home automation systems or a Daikin intelligent controller.
User questions about FXNQ-P DAIKIN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air Conditioning in PDF format for free! Find your manual FXNQ-P - DAIKIN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FXNQ-P by DAIKIN.