EWADH14T-SLC2 - Air conditioner DAIKIN - Free user manual and instructions
Find the device manual for free EWADH14T-SLC2 DAIKIN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Air-cooled screw chiller (commercial air conditioner) |
| Brand | Daikin |
| Model | EWADH14T-SLC2 |
| Refrigerant | R-134a (HFC) |
| Cooling Capacity (Nominal) | Approx. 140 kW |
| Compressor Type | Hermetic screw compressor |
| Airflow Rate | Approx. 25,000 m³/h |
| Dimensions (W x D x H) | 2500 mm x 1200 mm x 1900 mm |
| Operating Weight | Approx. 1,800 kg |
| Power Supply | 400V / 3-phase / 50Hz |
| Nominal Power Input | Approx. 50 kW |
| EER (Energy Efficiency Ratio) | 2.8 (nominal) |
| Sound Level | 75 dB(A) at 1 m |
| Operating Ambient Range | -10°C to 46°C |
| Control System | Daikin Intelligent micro-processor controller |
| Safety Features | High/low pressure switches, thermal protection, refrigerant leak detector |
| Maintenance | Clean air filters every 3 months; inspect coils and refrigerant charge annually |
| Installation Requirement | Outdoor installation with proper clearance for airflow and service access |
| Repairability | Replaceable filters, fan motors, compressor oil and sealing kit |
| Warranty | Standard manufacturer warranty (varies by region) |
Frequently Asked Questions - EWADH14T-SLC2 DAIKIN
What type of refrigerant does the Daikin EWADH14T-SLC2 use?
The Daikin EWADH14T-SLC2 uses R-134a refrigerant, an HFC with zero ozone depletion potential. This is common for large screw chillers.
What is the cooling capacity of this unit?
The nominal cooling capacity is approximately 140 kW, which is suitable for medium to large commercial spaces. Actual capacity may vary with ambient temperature and load conditions.
How often should I clean the air filters?
It is recommended to clean the air filters every 3 months to maintain optimal airflow and efficiency. More frequent cleaning may be needed in dusty environments.
Can this air conditioner be used for heating as well?
The EWADH14T-SLC2 is a cooling-only unit. For heating, a separate heat source or a heat pump model should be considered.
What are the recommended clearance distances for installation?
For proper airflow and service access, maintain at least 1 meter clearance on all sides and 2 meters above the unit. Refer to the installation manual for exact requirements.
How noisy is the unit during operation?
The sound level is approximately 75 dB(A) at 1 meter distance. Noise can be reduced by proper acoustic insulation and positioning.
What maintenance is required for the screw compressor?
Regular checks include oil condition, refrigerant pressure, and vibration. Change compressor oil as recommended (typically every 20,000 hours) and inspect seals.
Are there any safety features to prevent damage from high pressure?
Yes, the unit includes high-pressure switches, low-pressure switches, and thermal overload protection to safeguard the compressor and system.
Is it possible to monitor the unit remotely?
With the optional Daikin Intelligent Controller and connectivity modules, you can monitor operation, set temperatures, and receive alarms remotely via a building management system (BMS).
What is the expected lifespan of this air conditioner?
With proper maintenance, a Daikin screw chiller can last 15 to 20 years. Regular service of filters, coils, and compressor components will extend its life.
User questions about EWADH14T-SLC2 DAIKIN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air conditioner in PDF format for free! Find your manual EWADH14T-SLC2 - DAIKIN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EWADH14T-SLC2 by DAIKIN.