TS-239H - NAS QNAP - Free user manual and instructions
Find the device manual for free TS-239H QNAP in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | NAS (Network Attached Storage) |
| Brand | QNAP |
| Model | TS-239H |
| Number of Drive Bays | 2 |
| Compatible Drives | 3.5" SATA HDD/SSD |
| RAID Modes | RAID 0, RAID 1, JBOD |
| Network Interface | 2 x Gigabit Ethernet (RJ-45) |
| USB Ports | 3 x USB 2.0 |
| Processor | Intel Atom 1.8 GHz dual-core |
| Memory | 1 GB DDR3 RAM |
| Dimensions (W x H x D) | 165 x 85 x 218.4 mm |
| Weight | 1.5 kg (without drives) |
| Power Supply | External 90W adapter, 100-240V |
| Power Consumption | 20W in operation |
| Supported File Protocols | SMB, NFS, AFP, FTP, WebDAV |
| Main Functions | File sharing, backup, media server, iSCSI target |
| Management Interface | Web-based QTS operating system |
| Security Features | AES 256-bit volume encryption, user permissions |
| Maintenance & Clean | Wipe with dry cloth, ensure proper ventilation |
| Repairability | Hot-swap drive bays, spare parts available |
| Noise Level | Low-noise fan design, 22 dB(A) |
Frequently Asked Questions - TS-239H QNAP
How do I set up the QNAP TS-239H for the first time?
Connect the NAS to your network via Ethernet, install hard drives in the bays, and power it on. Use the Qfinder Pro utility to locate the device and run the Smart Installation Guide to configure network settings and create the initial administrator account.
Which hard drives are compatible with the TS-239H?
The TS-239H supports 3.5-inch SATA HDD and SSD. For best performance, use drives from QNAP's compatibility list, available on their official website.
How can I configure RAID on my NAS?
Log into the QTS interface, go to Storage Manager > Disks/VJBOD, select the drives, and create a RAID group. You can choose RAID 0 for performance, RAID 1 for redundancy, or JBOD for simple concatenation.
Can I access my files remotely?
Yes, you can use myQNAPcloud to access files over the internet. After creating a myQNAPcloud account, enable remote access in myQNAPcloud CloudLink and optionally set up SSH or VPN for secure connections.
Does the TS-239H support media streaming?
Absolutely. The built-in Media Library and DLNA Media Server allow you to stream videos, music, and photos to compatible devices such as smart TVs, consoles, and mobile apps like Qfile.
How do I back up files from my computer to the NAS?
Use QNAP NetBak Replicator for Windows or Time Machine for macOS. Alternatively, enable SMB or NFS shares and schedule backups using the built-in Hybrid Backup Sync center.
What are the default login credentials?
The default username is admin and the default password is admin. For security, you should change this immediately after the initial setup, as these defaults are widely known.
How do I reset the device to factory settings?
Press and hold the Reset button on the rear panel for 3 seconds to reboot normally, or hold it for 10 seconds to reset all settings to factory defaults. For details, see the manual's troubleshooting section.
Is the QNAP TS-239H quiet during operation?
The TS-239H features a low-noise fan and vibration-damping pads, keeping noise around 22 dB(A). It's suitable for home offices or living spaces, but actual noise depends on drive model and environmental temperature.
Can I replace a hard drive without shutting down the NAS?
Yes, the drive bays are hot-swappable. In a RAID 1 configuration, you can replace a failed drive while the system is running. The RAID will rebuild automatically after installing the new drive.
User questions about TS-239H QNAP
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your NAS in PDF format for free! Find your manual TS-239H - QNAP and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TS-239H by QNAP.