B916 - Surveillance Camera ACTi - Free user manual and instructions
Find the device manual for free B916 ACTi in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Surveillance / IP Security Camera |
| Brand | ACTi |
| Model | B916 |
| Image Sensor | 1/2.7-inch Progressive CMOS |
| Max Resolution | 2592 x 1944 (5MP) |
| Lens Type | Varifocal Lens |
| Focal Length | 3.3 - 12 mm |
| Field of View | 78° - 25° (Horizontal) |
| Infrared Distance | Up to 30 m |
| Video Compression | H.264, MJPEG |
| Network Interface | 10/100Base-T RJ-45 |
| Power Supply | PoE (IEEE 802.3af), DC 12V |
| Power Consumption | Max 7.5W |
| Dimensions (W x H x D) | 70 x 66 x 125 mm |
| Weight | 500 g |
| Housing / Protection | Aluminum, IP66 Weatherproof |
| Operating Temperature | -30°C to 50°C |
| Storage | MicroSD Card Slot (up to 128GB) |
| Security | Password Protection, IP Filtering, HTTPS, 802.1x |
| Maintenance and Cleaning | Clean lens with soft dry cloth; inspect seals and cables periodically |
| Spare Parts and Reparability | Replacement lens, sensor, and IR module available; contact ACTi support |
Frequently Asked Questions - B916 ACTi
How do I reset my ACTi B916 camera to factory defaults?
Press and hold the reset button on the back of the camera for 10 seconds while powered on. This restores the default IP address 192.168.0.90 and all settings. Refer to the user manual for exact reset positions.
What are the default IP address and login credentials?
The default IP address is 192.168.0.90 with subnet mask 255.255.255.0. The default username is admin and password is admin. Change them immediately to prevent unauthorized access.
How do I connect the B916 to my network?
Connect an Ethernet cable from the camera to a PoE switch or use a 12V DC power adapter. Set a static IP or use DHCP. Use the ACTi Configuration Manager to assign the camera an IP address within your local network.
Can I access the camera remotely over the internet?
Yes, set up port forwarding for HTTP, RTSP, and ONVIF on your router. Connect via the public IP address or use ACTi's DDNS service. Always use strong passwords and HTTPS for secure remote access.
How do I update the camera's firmware?
Download the latest firmware for the ACTi B916 from the official web site. In the web interface, go to Maintenance > Firmware Upgrade, upload the file, and start the process. Do not power off during upgrade.
How can I set up motion detection?
Go to Event > Motion Detection in the camera's web interface. Enable the feature, adjust the detection sensitivity, and draw regions of interest. You can trigger email alerts and edge recording.
What should I do if the camera is not found on the network?
Check physical connection and PoE status. Verify the network settings and use the ACTi Discovery Tool to scan the subnet. If applicable, reset the camera and reconfigure with static IP.
What is the night vision range and how to get the best IR performance?
The built-in IR LEDs provide up to 30 meters of visibility. Keep surfaces away from the lens and remove obstacles. Use day/night mode and adjust IR intensity settings via the web interface for optimal low-light performance.
Is the B916 ONVIF compatible and can it work with other NVR software?
Yes, the camera supports ONVIF Profile S. Use the IP address and ONVIF credentials when adding it to a third-party VMS or NVR. Common ONVIF port is 8000; enable it in network settings.
How do I use the MicroSD card for edge recording?
Insert a microSD card into the slot and log in to the web interface. Navigate to Storage > SD Card, format the card, and choose a recording mode: continuous, motion trigger, or schedule. Ensure the card has enough capacity and encryption is disabled.
User questions about B916 ACTi
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Surveillance Camera in PDF format for free! Find your manual B916 - ACTi and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. B916 by ACTi.
USER MANUAL B916 ACTi
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ACTi
Model : B916
Category : Surveillance Camera