GW2250E - Screen BENQ - Free user manual and instructions
Find the device manual for free GW2250E BENQ in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED-backlit LCD monitor |
| Brand | BenQ |
| Model | GW2250E |
| Screen Size | 21.5 inches (54.6 cm) |
| Panel Type | VA with AMA technology |
| Resolution | 1920 x 1080 (Full HD) |
| Aspect Ratio | 16:9 |
| Brightness | 250 cd/m² |
| Contrast Ratio (Native) | 1000:1 |
| Dynamic Contrast Ratio | 20,000,000:1 |
| Response Time | 5 ms (GTG) |
| Viewing Angles | 178° horizontal / 178° vertical |
| Connectivity | DVI-D, D-Sub (VGA) |
| VESA Mounting | 100 x 100 mm |
| Tilt Angle | -5° to +20° |
| Power Consumption (Typical) | 24 W |
| Standby Power Consumption | < 0.3 W |
| Dimensions (with Stand, W x H x D) | 513 x 400 x 193 mm |
| Weight (with Stand) | 3.7 kg |
| Special Features | Flicker-free, Low Blue Light, Senseye 3 |
| Cleaning Instructions | Unplug the monitor and wipe with a soft, dry microfiber cloth |
| Safety Warning | Do not expose the screen to water, excessive heat, or direct sunlight |
| Spare Parts and Repairability | Contact BenQ authorized service centers for internal components and firmware updates |
| Package Contents | Monitor, power cord, D-sub cable, CD-ROM with user manual and quick start guide |
Frequently Asked Questions - GW2250E BENQ
What is the native resolution of the BenQ GW2250E monitor?
The native resolution is 1920 x 1080 at 60 Hz, which is Full HD.
How do I connect the monitor to my computer?
The monitor has both DVI-D and D-Sub (VGA) inputs. Use an appropriate cable to connect to your graphics card. For optimal quality, prefer DVI.
How do I clean the screen safely?
Turn off the monitor and unplug the power cable. Use a soft, dry microfiber cloth to gently wipe the screen. Do not use liquid cleaners or abrasive materials.
Does the BenQ GW2250E support VESA mounting?
Yes, it supports 100 x 100 mm VESA wall mounting or arm mounting, allowing you to save desk space.
What are the main eye-care features of this monitor?
The GW2250E includes Flicker-free technology and a Low Blue Light mode to reduce eye strain during long sessions.
Why is there no image on the screen after turning it on?
Check if the power cable is securely connected and the monitor is powered on. Ensure the signal cable is properly attached to both the monitor and the computer, then select the correct input source via the OSD menu.
How can I adjust the monitor's brightness and contrast?
Press the menu button on the front or side bezel to open the On-Screen Display (OSD). Use the navigation keys to select 'Picture' settings, then adjust brightness and contrast.
What should I do if the monitor shows fuzzy or distorted text?
Set the resolution to the native 1920 x 1080 in your operating system's display settings. Also ensure the refresh rate is set to 60 Hz and check the cable connection.
Is the BenQ GW2250E suitable for gaming?
It has a 5 ms response time and a VA panel with good contrast, making it suitable for casual gaming. For competitive gaming, consider monitors with higher refresh rates.
How do I reset the monitor to factory settings?
Enter the OSD menu, go to System or Setup, select 'Reset' or 'Factory Reset' and confirm. This restores all default settings.
User questions about GW2250E BENQ
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Screen in PDF format for free! Find your manual GW2250E - BENQ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GW2250E by BENQ.
USER MANUAL GW2250E BENQ
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BENQ
Model : GW2250E
Category : Screen