2910018 - Uncategorized Foster - Free user manual and instructions
Find the device manual for free 2910018 Foster in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Cooker hood |
| Brand | Foster |
| Model | 2910018 |
| Width | 600 mm |
| Depth | 300 mm |
| Height | 220 mm |
| Weight | 9 kg |
| Power supply | 220-240 V, 50 Hz |
| Total power consumption | 260 W |
| Max air flow | 520 m³/h |
| Number of speeds | 3 speeds + intensive |
| Noise level | 65 dB(A) max |
| Lighting | 2 x 1.5 W LED |
| Grease filter | Aluminium, washable |
| Outlet diameter | 150 mm |
| Control type | Electronic push buttons |
| Installation | Built-in under cabinet |
| Recirculation mode | Optional with carbon filter |
| Safety | Thermal overload protection |
| Maintenance | Clean grease filters regularly |
| Spare parts | Available for filters and lamps |
| Energy class | A |
Frequently Asked Questions - 2910018 Foster
How do I install the cooker hood?
To install the cooker hood, first measure the space under your cabinet and ensure the dimensions match. Use the included mounting template to mark the fixing holes. Drill the holes, insert wall plugs, and secure the hood with screws. Connect the ducting to the outlet pipe, then wire the hood to a suitable power supply. If uncertain, consult a qualified electrician.
How often should I clean the grease filters?
Cooker hood grease filters should be cleaned every 4-6 weeks depending on usage. Soak the aluminium filters in hot soapy water or use a dishwasher at low temperature. Dry them thoroughly before reinstalling to prevent rust.
How do I replace the LED light?
To replace the LED light, switch off the hood and disconnect the power. Remove the light cover, pull out the old LED module, and insert the new one. Ensure the replacement is compatible with the specified voltage and fitting.
Can I use the hood in recirculation mode?
Yes, the Foster 2910018 can be used in recirculation mode with an optional carbon filter. The carbon filter absorbs odours and must be replaced every 3-6 months for best performance.
How do I activate the intensive speed?
The intensive speed is activated by pressing the higher speed button again beyond the maximum speed, or by pressing the dedicated intensive button. It runs at maximum power for a few minutes before automatically returning to the previous speed, helping to clear strong odours quickly.
Why is the hood noisy?
The noise level is highest at max speed. Ensure the ducting is not blocked and that the filters are clean. If the noise persists, check that the motor is properly secured and that there are no loose components.
How do I clean the stainless steel surface?
Use a soft cloth with warm water and a mild detergent, or a specific stainless steel cleaner. Always wipe along the steel grain to avoid streaks. Dry with a soft cloth to prevent water marks.
What is the minimum distance between the hob and the hood?
For electric hobs, the minimum distance is 500 mm. For gas hobs, the minimum distance is 650 mm. Always check the user manual and local regulations.
How do I reset the filter saturation indicator?
After cleaning or replacing filters, press and hold the light button for 3 seconds until the indicator light goes off. The hood automatically resets the counter.
What should I do if the motor stops working?
Check the power connection and ensure the fuse is intact. If the motor still does not work, it may be overheated. Let it cool down. If the problem persists, contact Foster support for professional repair.
User questions about 2910018 Foster
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual 2910018 - Foster and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 2910018 by Foster.